The Small Airplane Light Kit is MyTrickRC's first Light Kit, and it's still very popular around the world.  The Small Airplane Light Kit is designed to fit Airplanes with a Maximum Wingspan of 40".  Whether you’re building an old War Bird, or more modern aircraft, the UF-7 Lighting Controller in this kit has MODEs suitable to each.  The Scale Blink Patterns in our Aircraft MODEs look so cool, both in flight and on the tarmac.  Dusk is an ideal time to fly with these lights - you can still see your plane’s body as pops of LED light perfectly accent it.  And MyTrickRC doesn’t skimp on our LEDs - these are the Brightest 3mm & 5mm LEDs out there, so you get maximum enjoyment from them even at a distance.  We specially matched these LEDs so all LEDs are equally Bright.  Don’t forget your camera - you’ll definitely want to get video and shoot some pics.

Want to make night flying easier?  Add a pair of Attack Headlights to the bottom of your wings.  Their Low Profile design is flat and can be easily bonded to the underside of your wings.  Their high intensity light will help you see the runway as you come in for a landing.  When connected to the Pigtail of your UF-7C, these High Intensity LEDs will cast a wide area of light downwards.  The Plug and Play solution for adding Attack Headlights to your UF-7C is to purchase one of our UF-7C Light Bar Regulators.  The UF-7C Light Bar Regulator will ensure your LEDs will receive correct power from the Receiver, and this makes the Headlights Plug and Play.  Attack Headlights  UF-7C Light Bar Power Regulator

Small Airplane Light Kit includes:

• 1pc UF-7C Controller
• 1pc 5mm 20" GREEN NAV LED
• 1pc 5mm 20" RED NAV LED
• 2pc 5mm 20" WHITE LANDING LEDs
• 2pc 5mm 20" WHITE WING STROBE LEDs
• 2pc 5mm 20" RED FUSELAGE STROBE LEDs
• Receiver Power and 9V battery Adapters

Key Benefits of this Lighting Package

• Great lighting effects for a low cost
• Easy to install and set up, Plug and Play
• Scale Blink Patterns
• MODEs for War Birds with Guns or Jets with Afterburner
• Optional Gun LEDs
• Lights get power from airplane’s receiver so no extra battery needed
• ON/OFF Switchable Landing Lights for added realism
• Expandable means it's Easy to Add More Lights
• Fits up to 40” Wingspan

• Fits up to 40" Wingspan
• Scale Blink Patterns
• Switched Landing Lights
• Plug and Play

The Large Airplane Light Kit was born out of the local flyers around Southern California.  With their input, MyTrickRC developed a Light Kit for Larger Aircraft.  The Large Airplane Light Kit fits planes with a Wingspan up to 90″.  But if you have a larger wingspan than this, we also offer 8" and 12" LED Extenders*.  The Large Airplane Light Kit has now become our most popular Aircraft Light Kit.  Another Great Feature of this kit is that it has Quick Disconnects so it’s Simple to Disconnect the Wing from the Fuselage - that’s a MyTrickRC innovation.  Also, Remote Switched Landing Lights come standard.  (If you don’t want Remote Switching, just don’t connect that servo Cable, it’s that simple.)  This system is all Plug and Play, no soldering required!  The MyTrickRC way, Simple, Reliable, Scale – that’s what the Large Airplane Light Kit is all about. 

More about UF-7C Aircraft MODEs

Whether you use this Large Airplane Light Kit for your build or you build a Custom kit, the UF-7C is easy to expand and add more Lights to.  And whether you're building a Warbird, or Modern Aircraft, the UF-7C Lighting Controller is equally perfect for both.  When MyTrickRC upgraded the UF-7 to the UF-7C we extensively expanded Aircraft MODEs features and functions.  We also dedicated more programming memory on the UF-7C to Aircraft MODEs than any other RC Vehicle on the controller.  With MODEs like Warbird which offers Wig-Wag style Landing Lights and Gun LEDs, or Fighter Jet which has Switchable Landing Lights, After Burner**, and Gun LEDs on top of the standard Nav Lights and Strobes, you can make a Super Scale Airplane!  But even in our standard Aircraft Modes, not only did we add more Strobe Options to each MODE, we made it so you can easily add Downward Facing High Intensity Landing Lights (that are On/Off Switched with your Standard 5mm forward facing Landing Lights).  This way you'll be able to see the ground MUCH better as you're coming in for a landing.  Oh, our Attack High Power lights are super flat and can be glued right to the bottom of your wing!  This means mounting them is super easy, and with minimal impact to flight performance.  Simply plug them into the UF-7C's Pigtail, and you'll have lights***!  MyTrickRC is all about making your experience as awesome as possible, so we went all out to give you the most Comprehensive Controller possible for all your RC Airplane lighting needs.

Want to make night flying easier?  Add a pair of Attack Headlights to the bottom of your wings.  Their Low Profile design is flat and can be easily bonded to the underside of your Wings.  Their high intensity light will help you see the runway as you come in for a landing.  When connected to the Pigtail of your UF-7C, these High Intensity LEDs will cast a wide area of Light Downwards.  The Plug and Play solution to adding Attack Headlights to your UF-7C is to purchase one of our UF-7C Light Bar Regulators.  The UF-7C Light Bar Regulator will ensure your LEDs will receive correct power from the Receiver, and this makes the Headlights Plug and Play.  Attack Headlights  UF-7C Light Bar Regulator

Large Airplane Light Kit includes:

• 1pc UF-7C Controller
• 1pc 5mm 45" GREEN NAV LED with inline Quick-Disconnect
• 1pc 5mm 45" RED NAV LED with inline Quick-Disconnect
• 2pc 5mm 45"  WHITE LANDING LED with inline Quick-Disconnect
• 2pc 5mm 45"  WHITE WING STROBE WING LED with inline Quick-Disconnect
• 2pc 5mm 20" RED FUSELAGE STROBE WING LED

*    8" and 12" LED Extension Cables Sold Separately

**  For Afterburner, simply plug one or more of our Halo or other Very Bright Wafer LEDs, into the UF-7C's Pigtail output.  Afterburner will activate at full throttle only!

***  Connecting to the UF-7C's Pigtail out requires a UF-7C Light Bar Adapter Cable.  This is a Plug and Play solution.

• Fits up to 90" Wingspan
• Scale Blink Patterns
• Switched Landing Lights
• Wing Quick Disconnects
• Plug and Play

This hat is structured with a classic fit, flat brim, and full buckram. The adjustable snap closure makes it a comfortable, one-size-fits-most hat.

• 80% acrylic, 20% wool
• Green Camo is 60% cotton, 40% polyester
• Structured, 6-panel, high-profile
• 6 embroidered eyelets
• Plastic snap closure
• Green undervisor
• Head circumference: 21⅝″–23⅝″ (54.9 cm–60 cm)

Size guide

• Embroidered
• Cotton-Wool
• 6-Panel Design
• Snap Back
• Two Styles

This unisex tee has a classic v-neck cut and fits like a well-loved favorite.

• 100% combed ring-spun cotton
• Pre-shrunk fabric
• Fabric weight: 4.2 oz/yd² (142 g/m²)
• Regular fit
• Side-seamed construction
• Coverstitched v-neck and hemmed sleeves
• Shoulder-to-shoulder taping
• Blank product sourced from Nicaragua, Guatemala, or the US

This product is made especially for you as soon as you place an order, which is why it takes us a bit longer to deliver it to you. Making products on demand instead of in bulk helps reduce overproduction, so thank you for making thoughtful purchasing decisions!

Size guide

• Pre-Shrunk
• Regular Fit
• Double Seamed
• Top Quality
• UniSex

A sturdy and warm sweatshirt bound to keep you warm in the colder months. A pre-shrunk, classic fit sweater that's made with air-jet spun yarn for a soft feel and reduced pilling.

• 50% cotton, 50% polyester
• Pre-shrunk
• Classic fit
• 1x1 athletic rib knit collar with spandex
• Air-jet spun yarn with a soft feel and reduced pilling
• Double-needle stitched collar, shoulders, armholes, cuffs, and hem

This product is made especially for you as soon as you place an order, which is why it takes us a bit longer to deliver it to you. Making products on demand instead of in bulk helps reduce overproduction, so thank you for making thoughtful purchasing decisions!

• Pre-Shrunk
• Classis Fit
• Double Seamed
• Cotten-Polyester
• UniSex

You can never go wrong with a classic bomber jacket, especially when it’s high quality and made of recycled materials. This versatile bomber jacket will complement most outfits and styles, and keep you warm during the chillier days.

• 100% recycled polyester
• Fabric weight: 5.5 oz/yd² (156 g/m²)
• Relaxed fit
• Unisex sizing
• Utility pocket on the sleeve
• Rib-knit banding at collar, cuffs, and hem
• Premium YKK zipper
• Blank product sourced from China

This product is made especially for you as soon as you place an order, which is why it takes us a bit longer to deliver it to you. Making products on demand instead of in bulk helps reduce overproduction, so thank you for making thoughtful purchasing decisions!

• 100% Polyester
• Relaxed Fit
• Comfortable/li>
• Unisex
• Premium Zipper

Deluxe Boat Light Kit

The Deluxe Boat Light Kit is a Premium Scale RC Light Kit for your RC Power or Sail Boat.  Impress your friends with the incredible Scale Appearance and Brightness of these lights.

This 100% Waterproof Light Kit includes Super Bright LEDs and MyTrickRC's SQ-1 Lighting Controller which is nice and compact so it's easier to install, and adds Minimum Weight to your Boat.  The 3D Printed Navigation Light Housing and Stern Light Pole have a great Realistic Appearance, and are extremely Visible at Night.  They are made from Rugged Nylon plastic, and designed to be Plug and Play.  The Deluxe Boat Light Kit also has Remote On/Off Controlled on a 3rd Channel, so it's possible to switch your lights On and Off from your Transmitter.  All required Mounting Hardware and instructions come included.

Deluxe Boat Light Kit Includes:

• 1pc SQ-1 Controller (powers from your boat's receiver, or optional 9V battery*)
• 1pc 3mm Super Bright WHITE Stern LED
• 1pc 3mm Super Bright RED Nav LED 
• 1pc 3mm Super Bright GREEN Nav LED
• 1set 3D Printed Nav Light and Stern Pole
• Mounting Hardware

*9V Battery Adapter Cable Sold Separately

• SQ-1 Controller
• Deluxe Boat Kit
• Scale Nav Lights
• Remote On/Off
• Waterproof

The 2 Headlight Car Kit is MyTrickRC’s first ever RC Car Light Kit, and it's still one of our most popular Kits!

This simple, yet powerful Kit lets you have Headlights, Tail/Brake Lights, and 4 orange Turn Signals that can be set to operate while turning!

At the heart of this Kit is our UF-7C Light Controller capable of running 4.5 to 12VDC at 2amps and is 100% Waterproof!

Here are a few of the UF-7C's modes: Off Road Modes with Optional Remote On/Off Control, Center Brake Light, Backfire, Automatic Hazard Lights, additional Emergency Strobes, and MORE!

This system is Plug and Play, and requires no soldering or fuss.  The Kit includes all parts needed for installation.  Still have questions? Check out our detailed Installation Videos where we walk you though the whole installation process!  MyTrickRC is all about great value, and helping you get the best results possible from your builds. 

2 Headlight Car Kit Includes:

• 1 - UF-7 Controller
• 4 - 3mm Single Amber Light
• 1 - 5mm Dual Red Light
• 1 - 5mm Dual White Light
• 1 - UF-7 9V Power Cable
• 1 - UF-7 Y-Splitter

• UF-7C Controller
• 2pc Headlights
• Tail/Brake & Turn
• Center Brake
• Reverse

4 Headlight Car Kit 

The 4 Headlight Car Kit is a 4 headlight/tail light version of our 2 Headlight Car Kit; the first RC Car Light Kit MyTrickRC ever made!

This simple, yet powerful kit lets you have 4 headlights, 4 tail/brake lights, and 4 orange turn signals that can be set to operate while turning!

At the heart of this kit is our UF-7C Light Controller capable of running 4.5 to 12VDC at 2amps and is 100% Waterproof! 

Here are a few of the UF-7C's modes: Off Road modes with Optional Remote On/Off Control, Center Brake Light, Backfire, Automatic Hazard Lights, additional Emergency Strobes, and MORE! 

This system is Plug and Play, and requires no soldering or fuss.  All parts needed for installation are included in the kit.  Still have questions? Check out our detailed Installation Videos where we walk you though the whole installation process!  MyTrickRC is all about great value, and helping you get the best results possible from your builds. 

Headlight Car Kit Includes:

• UF-7C Light Controller
• 2pcs 3mm Dual WHITE Headlights
• 1pcs 3mm Dual RED Tail-Brake Lights
• 2pcs 3mm Single RED Tail Turn Signals
• 2pcs 3mm Single ORANGE  Front Turn Signals
• UF-7 Lighting Controller
• 2 Power Y-Cable for Tail/Brake & Turn Signal function
• 9V battery Adapter 
• Mounting Hardware

• UF-7C Controller
• 4pc Headlights
• Tail/Brake & Turn
• Center Brake
• Reverse

     Out of Stock

Looking to add a scale backfire light to you Drift Car, Street Car, or Basher!? The AB-101 Backfire Kit is a simple to install, low cost way to make it happen!

The AB-101 Backfire Kit comes standard with our SQ-1 Light Controller. An easy to use, plug-n-play controller that taps into your vehicles receiver for power and throttle signal. The SQ-1 was developed with direct input and testing by leaders in the drift community. The SQ-1's Backfire function went through months of testing and refinement to get the final scale effect we were looking for.   

Installation is super simple, and the system is easily expandable. Adding more LEDs & functions like Brake, Reverse, Running Lights, Hazard, Etc., is easy. Just plug them in and go! 

Some other great features are the SQ-1's compact size, minimizing weight and area needed for installation. Also, the AB-101 Backfire Kit is 100% waterproof!  So if you ever want to Drift or Bash in the Rain it's no problem. The SQ-1 also comes with a Quick Disconnect cable so it's a snap to remove and re-attach the body from chassis.

AB-101 Backfire Kit Includes:

• SQ-1 Controller
• 1pc 3mm Single ORANGE Backfire LED
• Mounting Hardware
• Quick Disconnect Cable

• SQ-1 Controller
• 1pc Scale Backfire
• Expandable
• Waterproof
• Compact

AB-701 Drift Car Kit

Looking to take your drift car build to the next level!? The AB-701 Drift Car Kit is for you!

The AB-701 Drift Car Kit comes standard with headlights, tail/brake, reverse, a backfire light, and you also get hazard lights!

Our SQ-1 Light Controller. An easy to use, plug-n-play controller that taps into your vehicle’s receiver for power and throttle signal. The SQ-1 was developed with direct input and testing by leaders in the drift community. The SQ-1's Backfire function went through months of testing and refinement to get the final scale effect we were looking for.  

Installation is super simple, and the system is easily expandable. Adding more LEDs & functions like Brake, Reverse, Running Lights, Hazard, Etc., is easy. Just plug them in and go!

Some other great features are the SQ-1's compact size, minimizing weight and area needed for installation. Also, the AB-701 Backfire Kit is 100% waterproof! So, if you ever want to Drift or Bash in the Rain it's no problem. The SQ-1 also comes with a Quick Disconnect cable so it's a snap to remove and re-attach the body from chassis.

AB-701 Drift Car Kit Includes:

• 1pc SQ-1 Controller
• 1pc 5mm Dual WHITE Headlights
• 1pc 5mm Dual RED Tail-Brake Lights
• 1pc 5mm Dual AMBER Front Running
• 1pc 3mm Single ORANGE Backfire
• Power Y-Cable with Quick Connect
• Mounting Hardware

• SQ-1 Controller
• 2pc Headlights
• 2pc Tail/Brake Lights
• 1pc Backfire
• Expandable

AB-1402 Drift Car Kit

Looking to take your drift car build to the next level!? The AB-1402 Drift Car Kit is for you!

The AB-1402 Drift Car Kit comes standard with 4 headlights, 4 tail/brake, reverse, 2 backfire lights, and you also get hazard lights!

Our SQ-1 Light Controller. An easy to use, plug-n-play controller that taps into your vehicle’s receiver for power and throttle signal. The SQ-1 was developed with direct input and testing by leaders in the drift community. The SQ-1's Backfire function went through months of testing and refinement to get the final scale effect we were looking for.  

Installation is super simple, and the system is easily expandable. Adding more LEDs & functions like Brake, Reverse, Running Lights, Hazard, Etc., is easy. Just plug them in and go!

Some other great features are the SQ-1's compact size, minimizing weight and area needed for installation. Also, the AB-1402 Drift Car Kit is 100% waterproof! So, if you ever want to Drift or Bash in the Rain it's no problem. The SQ-1 also comes with a Quick Disconnect cable so it's a snap to remove and re-attach the body from chassis.

AB-1402 Drift Car Kit Includes:

• 1pcs SQ-1 Lighting Controller
• 2pcs 5mm Dual White Headlight LEDs
• 2pcs 5mm Dual RED Tail/Brake LEDs
• 1pcs 5mm Dual AMBER Running Light LEDs
• 1pcs 3mm Dual ORANGE Backfire LEDs
• Quick Disconnect Power Cable (easy to remove body)
• Mounting Hardware

• SQ-1 Controller
• Deluxe Drift Kit
• 4pc Head & Tail Lights
• 2pc Scale Backfire
• Auto-Hazard Lights

Police Body Light Kit

Want to Build an Ultra-Scale Police Car,  well, the Police Body Light Kit is the place to start!   The Police Body Light Kit is the most Popular Emergency Kit we sell.   This Kit is based around the well proven UF-7 Lighting Controller, and together with our Super Bright LEDs and Ultra-Scale Emergency Vehicle Blink  MODEs,  the Scale Realism will knock your socks off!  With functioning Headlights, Tail/Brake Lights, and available Remote ON/OFF Control of the Strobes (additional Y-Cable for needed, sold separately),  no other kit on the planet comes close to MyTrickRC’s Police Body Light Kit.  Oh, and this kit is Plug and Play, so Installation is Easier and Faster than Ever!  MyTrickRC helps you get Great Results by offering Clear Instructions, Dependable Products, and Helpful Install Videos.  Join the Thousands of other Happy MyTrickRC Customers, and see How Awesome your RC Police Car Project come out!

Police Body Light Kit Includes:

• 1pcs 5mm Dual WHITE Headlight LEDs
• 1pcs 3mm Dual RED Tail-Brake LEDs
• 2pcs 3mm Single RED Strobes
• 2pcs 3mm Single BLUE Strobes
• UF-7R Universal Light Controller
• Power Cables to power off your car’s battery, or 9V battery
• Mounting Hardware

• 2 Headlights
• 2 Tail/Brake Lights
• 2 Red Strobes
• 2 Blue Strobes
• Power: 9V or Receiver

**Roof Flasher Bar sold separately, not included in this kit. 

Police Deluxe Light Kit

Amp up your next Police Vehicle Project with our NEWLY upgraded Police Deluxe Light Kit. 

We've added more detailed MODEs for Emergency Vehicles, offering more Strobe Configuration Options.  Not only did we Upgrade the UF-7 MODEs, but we also added MODEs and more LEDs to the Police Flasher.   This System is all about giving you More Options to Build the Way You Want.  The Police Deluxe Light Kit is also Plug and Play, so Installation is easier than ever! 

And Don't forget the High Quality Sticker Set that comes with the Kit.  MyTrickRC gives you an entire set of Beautifully Detailed Scale Door Badges and Enforcement Insignia to choose from.  At MyTrickRC we have worked to Simplify the Police Deluxe Light Kit so it Comes Out as Awesome as Possible!  And don't forget the Super Bright LEDs, No One is going to miss this Police Car Coming!

Police Deluxe Light Kit Includes:

• 1pcs 5mm Dual WHITE Headlight LEDs
• 1pcs 3mm Dual RED Tail-Brake LEDs
• 2pcs 3mm Single RED Strobes
• 2pcs 3mm Single BLUE Strobes
• UF-7R Universal Light Controller
• Power Cables to power off your car’s battery, or 9V battery
• Mounting Hardware

Also Includes Roof Flasher Bar:

• 1/10 Scale Light Bar with 7  different Scale Blink Patterns
• Powers off Receiver, or 9V battery
• Mounting Hardware

Also Includes Police Sticker Set:

• Scale Police & Sheriff Door, Trunk, and Roof Stickers

**Remotely Control your flashers ON/OFF function from your transmitter (transmitter with 3rd channel required)

• Police Body Kit
• Roof Flasher Bar
• Scale Stickers
• Remote On/Off
• Red/Blue Strobes

Fire Truck Body Light Kit

MyTrickRC's Fire Truck Body Light Kit is an Industry Standard when it comes to RC Fire Truck Builds!

  This Easy to Install kit is based on our well proven UF-7R Controller and features Headlights, Tail/Brake, and 8 Body Strobes.   The Super Bright LEDs found in all MyTrickRC Kits are carefully selected to be brightest you can find, and they will produce a shimmering effect on your Fire Truck.   

Want 3rd Channel ON/OFF switching on the strobes?  That ability comes standard on Fire Truck Body Light Kit,  all you need to do is add a second Y-Cable (sold separately), and that's it...  Plug and Play!   

MyTrickRC is all about High Quality, Dependability, Simplicity, and Cool Features.  Join the thousands of other happy MyTrickRC customers, see why the Fire Truck Body Light Kit is the Industry Leading Fire Truck Light Kit on the market.  

Includes:

• 2pc 5mm Single WHITE Headlights
• 5pc 3mm Dual RED Tail-Brake Lights & Corner Body Strobes
• UF-7R Universal Light Controller
• Power Cables to power off your car’s battery, or 9V battery
• Mounting Hardware

**Roof Flasher Bar sold separately, not included in this kit. 

• Strobing Headlights
• Tail/Brake Lights
• 8 Red Strobes
• Ultra Bright LEDs
• UF-7R Controller

Fire Truck Deluxe Light Kit

If you want to build the Ultimate Fire Truck, MyTrickRC's Fire Truck Deluxe Light Kit has what you need to get some Amazing Results! 

Packed with so much cool stuff,  the Fire Truck Deluxe Light Kit combines Super Bright Body Lights, Multi-Mode Roof Flasher, and High Quality Scale Sticker Set.   Not only will you get Standard Headlights and Tail/Brake Lights, you also get 3rd Channel Remote ON/OFF control of the Emergency Strobes.   

With the Remarkably Bright LEDs in the Fire Truck Deluxe Light Kit and Scale Blink Patterns of the Roof Flasher, the Scale Realism will knock your socks off.   MyTrickRC is all about Helping You get Great Results, and giving you a system that will give years of Trouble Free Operation. 

Quality, Dependability, and Simplicity are the core values of MyTrickRC, and that's what you'll get with the Fire Truck Deluxe Light Kit.  This kit is fully Plug and Play, making Installation Easier than Ever.  Get ready to impress the heck out of your Friends and Family with the super awesome Fire Truck Deluxe Light Kit.  

The Fire Truck Deluxe Light Kit is so Brightly Lit that everyone who see's it cant help but notice it.  The best part is that MyTrickRC makes building the Fire Truck Deluxe Light Kit easier than ever.  The System is 100% Plug ang Play, and the super Scale Light Bar and Scale Stickers make the Kit Complete.  We went out of our way To Help You get Great Results.

Includes:

• 2pc 5mm Single WHITE Headlights
• 5pc 3mm Dual RED Tail-Brake Lights & Corner Body Strobes
• UF-7R Universal Light Controller
• Power off Receiver, or 9V battery
• Mounting Hardware

Also Includes Fire Flasher Bar

• 1/10 Scale Multi-MODE Super Bright Light Bar
• Power Cables to power off the UF-7 controller, or 9V battery
• Mounting Hardware

Also Includes Fire Sticker Set

• 1/10 Scale
• Ultra-Scale Door Shield, County, and Engine Number
• High Quality Printing

• Fire Truck Body Kit
• Roof Flasher Bar
• Scale Sticker Set
• Remote Strobe Control
• UF-7R Controller

Utility Body Light Kit

If you're building a Scale Utility Vehicle then MyTrickRC's Utility Body Light Kit will help you make it Great!  The Utility Body Light Kit is based around the well proven UF-7 Lighting Controller, and together with our Super Bright LEDs and Ultra-Scale Emergency Vehicle Blink  MODEs,  the Scale Realism takes your Utility Vehicle to the Next Level!  With functioning Headlights, Tail/Brake Lights, and available Remote ON/OFF Control of the Strobes (additional Y-Cable for needed, sold separately),  no other kit on the planet comes close to MyTrickRC’s Utility Body Light Kit.  Oh, and this kit is Plug and Play, so Installation is Easier and Faster than Ever!  MyTrickRC helps you get Great Results by offering Clear Instructions, Dependable Products, and Helpful Install Videos.  Join the Thousands of other Happy MyTrickRC Customers, and see How Awesome your Utility Vehicle come out!

Utility Body Light Kit Includes:

• 1pc 5mm Dual WHITE Headlights
• 1pc 3mm Dual RED Tail-Brake Lights
• 2pc 3mm Single RED Body Strobes
• 2pc 3mm Single ORANGE Body Strobes
• UF-7R Light Controller
• Power Cables for Receiver, or 9V battery
• Mounting Hardware

• 2 Headlights
• 2 Tail/Brake Lights
• 2 Red Strobes
• 2 Orange Strobes
• Power: 9V or Receiver

**Roof Flasher Bar sold separately, not included in this kit. 

ProLine Comp Wagon Light Kit

MyTrickRC's Pro-Line Comp Wagon Light Kit is the perfect upgrade to your competition rig. This Kit features a sleek and rugged, light weight Grill with integrated High Intensity Headlights. The Pro-Line Comp Wagon Light Kit also comes with two pairs of Attack Rock Light Pods and the compact HB-2 Lighting Controller. The Pro-Line Comp Wagon Light Kit powers off your vehicle's Receiver and is Plug and Play.

Features

• Simple, hassle-free operation
• Easy Assembly and Installation
• In-Line Quick Disconnects between Body and Chassis

What's Included

• Custom Scale Grill with Built-In:
• 1-Pair 27mm LED Strip Lights
• 1-Pair Clear Lenses
• 2-Pair Attack Spot Lights for Rock Lights
• 1-HB-2 Lighting Controller
• Mounting Screws and Zip Ties

Scale Grill Installation

Step one is to cut an opening in your vehicle Body for slipping in the Grill. The Grill has a slot on the top and sides for sliding into the Body.

Note: Cut right on the edge of where the body dips down into the Grill area. Use the Grill as a template and Be Careful not to cut away too much! The Grill is slotted so that it can slide into the cut body. Before cutting, use the Grill as a guide to confirm where to cut.

You can now slide your assembled Grill/light setup into your vehicle body.

We recommend securing it with a silicone-based adhesive such as Zap Goo, E-6000, Shoe Goo or equivalent.

• Scale Grill
• Super Bright Strip Lights
• 2pair Rock Light Pods
• HB-2 Controller
• Plug and Play

ProLine Power Wagon Light Kit

MyTrickRC's Pro-Line Power Wagon Light Kit is the perfect complement to your competition rig. This Kit features a sleek and rugged, light weight Grill with integrated High Intensity Headlights. The Pro-Line Power Wagon Light Kit also comes with two pairs of Attack Rock Light Pods and the compact HB-2 Lighting Controller. The Pro-Line Power Wagon Light Kit powers off your vehicle's Receiver and is Plug and Play.

Features

• Simple, hassle-free operation
• Easy Assembly and Installation
• In-Line Quick Disconnects between Body and Chassis

What's Included

• Custom Scale Grill with Built-In:
• 1-Pair 27mm LED Strip Lights
• 1-Pair Clear Lenses
• 2-Pair Attack Spot Lights for Rock Lights
• 1-HB-2 Lighting Controller
• Mounting Screws and Zip Ties

Scale Grill Installation

Step one is to cut an opening in your body for slipping in the Grill. The Grill has a slot on the top and sides for sliding into the body.

Note: Cut right on the edge of where the body dips down into the Grill area. Use the Grill as a template and Be Careful not to cut away too much! The Grill is slotted so that it can slide into the cut body. Before cutting, use the Grill as a guide to confirm where to cut.

You can now slide your Grill/Light assembly into your vehicle body. We recommend securing it with a silicone-based adhesive such as Zap Goo, E-6000, Shoe Goo or equivalent.

• Scale Grill
• Super Bright Strip Lights
• 2pair Rock Light Pods
• HB-2 Controller
• Plug and Play

Losi Promoto Motorcycle Light Kit

Amp up your Promoto Motorcycle with MyTrickRC's Losi Promoto Motorcycle Light Kit! The Losi Promoto Motorcycle Light Kit is a sleek and simple Light Kit that's a snap to install and has Nice Bright Light Pods in front and a Sleek Tail Light Pod tucked up inside the rear fender. The mounting locations of the LEDs on the Losi Promoto Motorcycle Light Kit were chosen to protect them from impacts. The locations are away from the bikes normal high impact, wear areas.  Additionally, the LEDs on the Losi Promoto Motorcycle Light Kit meet MyTrickRCs standard for Crazy Brightness, even in broad daylight.

NOTES:

This Kit powers directly off the Receiver.

The Tail Light includes an strong Adhesive Pad for installation, however, if you want added security in the adhesion to the rear fender, also adding some Zap Goo, Shoe Goo, or E-6000 around a couple edges works very well for these parts. These adhesives bond to both parts well.

**Be sure the rear fender is very clean before applying the Tail Light Pod. Clean the Promoto's rear fender with isopropyl alcohol (rubbing alcohol). Clean surface twice, allow the alcohol dry fully, then install Tail Light Pod by pressing the adhesive pad on the Tail Light Pod firmly in place. It takes about 24hrs for the adhesive pad to fully bond to both parts. Use the bike gently during these 24hrs after installing the tail light pod.

Features:

• Simple, hassle-free operation
• EasyAssembly and Installation
• Custom made kit compliments the Promoto's rad styling
• LEDs are very Bright and Functional Day and Night
• Powers On/Off with the Bike

Kit Includes:

• 1-Pair SP4 High Brightness Light Pods
• 1-Tail Light Pod
• 1-PAL3 Power Supply

Installation:

Remove Left Side Panel.

Connect the Light Pod to the Power Supply and place as shown. Connect the Light Pods to either black connector on the Power Supply.  You can use double back tape, Zap Goo, Shoe Goo, or E-6000 to bond the Power Supply to the bike.

Next feed Tail Light wire though the small hole in the metal plate on the side of the bike, as shown. Connect the Tail Light to the white port on the Power Supply.

Light Kit is now installed. Re-Install Motor Cover and Left Side Panel, you are DONE!

• Super Bright SP4 Pods
• Tail Light Pod
• PAL3 Power Supply
• Simple Install
• Expandable

MyTrickRC's Arrma Felony LED Light Kit takes your, already badass car to the next level!

Using MyTrickRC's super versatile Wafer LEDs combined with our powerful UF-7R controller, the Arrma Felony Kit completes the wicked attitude of the Arrma Felony.

So what makes the Arrma Felony Kit so incredible?  Start with the sleek design of the Carbon Nylon custom 3D Printed Headlight and Tail Lights that match the bodies geometry.  These MyTrickRC designed parts perfectly compliment the Rebel styling of the Arrma Felony.    And with our powerful new UF-7R Controller you get functioning Tail/Brake Lights, Reverse and Backfire!  MyTrickRC's Arrma Felony Kit is an insane kit for an insane car.  

One of the great aspects of the Arrma Felony Kit is how easy it is to expand your light system.  Want to add Underglow?  It's a snap with the Arrma Felony Kit.  Simply glue LEDs in place, and connect to the controller.  

Arrma Felony Kit Includes:

• 1 - UF-7R Light Controller
• 1 - 27mm White Linear Wafer LEDs with Lenses
• 1 - 9mm White Square Wafer LEDs with Lenses
• 2 - 27mm Red Linear Wafer LEDs
• 1 - 3mm Dual Orange LEDs with Conical Lens
• 1 - 3mm Dual White LEDs for Reverse
• 1 - 3mm Dual Yellow LEDs for Backfire
• 3D printed buckets 
• Zip Ties and Zip Tie Mounts for clean wiring management
• MyTrickRC Scale Bumper Stickers

• UF-7R Controller
• Tail/Brake LEDs
• Reverse Lights
  
• Backfire
  
• Expandable

MyTrickRC's Traxxas Ultimate RC Hauler Kit is the perfect light kit upgrade for your Ultimate RC Hauler Tow Truck.   

This incredible kit uses MyTrickRC's new UF-7R Controller.  One of the coolest aspects of the Traxxas Ultimate RC Hauler Kit is the UF-7R's flexibility, allowing you to configure your light system different ways depending on how you want it!   

By slightly changing the way LEDs are connected, and selecting a different MODE, you can easily configure, or change up your settings.  Everything you need for all configurations is included in the kit.  

SETUP #1 - Functioning Turn Signals

If you want a scale setup with functioning Turn Signals the Traxxas Ultimate RC Hauler Kit can do that. Set the UF-7R to MODE 7 and connect LEDs as shown:

• Port A - Reverse
• Port B - Left Rear Tail/Brake/Turn (use 2-way cables)
• Port C - Right Rear Tail/Brake/Turn
• Port D - Front Right Turn
• Port E - Headlights
• Port F - Front Left Turn

*This configuration doesn't support On/Off Control of Flasher Bar. MyTrickRC has solution for this coming soon.

SETUP #2 - Staged Lighting Control

Or, if you prefer a setup for Rock Crawling that has Scale Brakes and Reverse, and the ability to power a Flasher Bar then you want setup #2. By connecting UF-7R's Input 2 to the transmission servo, you can use the transmission switch to toggle through staged lighting. Staged lighting starts with all Lights OFF. the first toggle turns on front running lights, Tail/Brake, and Reverse. The next level adds Headlights, and the last level turns our port G which you can use to power a Flasher Bar, and/or High Power LEDs like Rock Lights, or Utility Lights.  Set the UF-7R to MODE 3 and connect LEDs as shown: 

• Port A - Reverse
• Port B - Blinking (not used)
• Port C - Tail/Brake
• Port D - Front Running Lights
• Port E - Headlights
• Port F - Center Bake (not used)
• Port G - High Power Output (not used)

SETUP #3 - Remotely Controlled Strobes

For Emergency Use Setup with wig-way strobes, set the UF-7R to MODE 10 and connect LEDs as shown: 

• Port A - Wig-Wag Strobe (side A)
• Port B - Tail/Brake (use 2-way cables)
• Port C - Slow Strobe (not used)
• Port D - Wig-Wag Strobe (side B)
• Port E - Headlights
• Port F - Slow Strobe (not used)
• Port G - Flasher Bar (optional)

*This configuration does support On/Off Control of a Flasher Bar, along with the strobes.  Connect UF-7R's input 2 to the transmission channel on your receiver.  You will have Tail/Brake function and Strobes in the Front Running Lights and Reverse.  Tail/Brake will function normally.

**The Traxxas Ultimate RC Hauler Light Kit does not come with a Flasher Bar, that is sold separately.  You can purchase that link here.  Click picture to view Flasher Bar.

Traxxas Ultimate RC Hauler Light Kit Includes:

• 1 - UF-7R Light Controller
• 2 - 5mm Single White LEDs (700mm)
• 2 - 5mm Single Red LEDs (700mm)
• 1 - 5mm Dual White LEDs
• 2 - 3mm Single Orange LEDs
• 2 - 5mm Single Red LEDs
• 2 - 2-Way LED Splitters
• Zip Ties and Zip Tie Mounts for clean wiring management
• Attack Scale Bumper Stickers

• UF-7R Controller
• Full Running Lights
• Scale Reverse Function
• Multiple Modes
• Expandable

DG-1 Dragon II Controller

The DG-1 Dragon II Controller is a Revolutionary and Innovative RC Lighting Controller that gives you the ability to add tons of High Power Lights to your RC Rig. Designed specifically for Off Road applications, the Dragon can power any MyTrickRC Attack Light Bar, Rock Light, Headlights, Halo and other MyTrickRC Wafer LEDs. It also gives you the ability to have Running Lights and Tail/Brake (or Reverse) so you can have a nicely lit Scale Truck. Many of our Off Road Kits use the Dragon as their Controller.

The clever design of the Dragon taps power directly off your Battery, so you can add as many Insanely Bright Attack LEDs as you want and never have to worry about overloading your Receiver! DG-1 Dragon also has a battery protect feature that will automatically power down the LEDs when your LiPo battery gets low so that you don't over-discharge it.

The Remote On/Off & Brightness control on the Dragon can be done Manually using its tethered MODE Button, or Remotely off a spare channel on your Receiver. And, the Dragon is Waterproof, so no need to worry about running in wet conditions. The Dragon also includes a Quick-Disconnect Power Cable so you can easily disconnect your vehicle Body from the Chassis. Join the family of customers who love the DG-1 Dragon Controller. With literally thousands of DG-1 Dragon's in the field, it's well proven design continues to light the trail of many happy MyTrickRC Customers.

What's Included

1pc DG-1 Dragon II Lighting Controller

Mounting Hardware

Specifications

Input: 11.4V Maximum

User Guide

• Adjustable Brightness
• Brake or Reverse
• On/Off Control
• Rugged Proven Design
• Waterproof

UF-7C Controller

MyTrickRC's UF-7C Controller was born out of its earlier cousin, our original UF-7 Controller. The success of the UF-7 Controller literally created MyTrickRC! The original UF-7's Rock Solid Electronics and Software, together with it's Plug & Play Design, and Simple Operation made it the obvious choice for RC Enthusiasts across the RC Hobby. We used it exclusively in our Original Light Kits. The Electronics in the original UF-7 were Tough and Reliable both by design and we don't cut corners on materials or components.

After many years of excellent success with the UF-7, we discovered that with a few simple tweaks, we could make it even better and greatly enhance its Overall Performance and Value. The UF-7C Controller uses the exact same Rock Solid Electronics as the original UF-7, but with four small, but powerful, upgrades. First we changed the MODE Button to be Waterproof, making the UF-7C Fully Controller Waterproof! Then we also upgraded all the connectors on the UF-7C Controller to be Gold Plated, further enhancing their long term contact performance, particularly around water! But we didn't stop there, we also upgraded the PigTail Output to support up to 2 Amps of Current! This means the UF-7C can Power Light Bars, Rock Lights, Halos, or MyTrickRC High Power Lights, and even certain Light Bars from Other Brands**! Yes, that's right, if you already have a Proline, or Any Light Bar that powers off the Receiver, you can power it from the UF-7C! Not only does this reduce the amount of wires to fuss with, the UF-7C Controller has a Plug & Play option that adds Remote On/Off Control of all your LEDs, including the Light Bar!

On the Software side of the UF-7C Controller, we made equally huge improvements! We figured out a completely new way to re-write the UF-7C Controller programming code, unleashing the full potential of the UF-7C Controller's Micro-Processor and onboard Memory to greatly expand the LED Blink Functions in EVERY MODE. So all the MODEs on the UF-7C got more blink features added to them. Some examples of features we added are*: Off Road MODEs with Optional Remote On/Off Control, Center Brake Light, Backfire, Automatic Hazard Lights, additional Emergency Strobes, Scale Warbird with Switchable Wig-Wag Landing Lights and so much more!

The UF-7C Controller includes:

• 1pc UF-7C Controller
• 1pc Servo Y-Cable
• 1pc 9V Battery Adapter
• Mounting Hardware

NOTES

1. The Power Ratings for the UF-7C Controller are: 4.5-12VDC, 2 Amps MAX.
2. UF-7C Controller's Pigtail Output passes Receiver Power straight through it. Therefore the voltage on the Pigtail Output will be the same as your Receiver. CAUTION - Do Not draw more power off your receiver than it's rated for.
3. UF-7C Controller's Port E (Headlights Port) can be used to power Headlights and/or Running Lights. Port E stays ON STEADY in all Land Vehicle MODEs.
4. Each port on the UF-7C Controller can power LOTs of LEDs, but the more LEDs you add to one port, the dimmer all of them will become. We recommend trying not to exceed 4 LEDs per UF-7C Controller LED Output.
5. A Higher Input Voltage on the UF-7C will make all of your LEDs slightly Brighter, However it's better for the Controller if you don't exceed 9VDC.
6. MyTrickRC sells LED Splitter Cables which allow you to add more LEDs to a port. However, you can't mix all LED colors together on one LED Splitter. Please see our NOTEs about this on the individual LED Splitter Product Pages. You can find LED Splitters here: https://mytrickrc.myshopify.com/collections/cables

* The NEW Blink features we mentioned are only in certain MODEs

** The UF-7C Controller Can Power:

• 1pc Attack 5" or 6" Light Bar, or Light Bar from Other Manufacturer

OR 1 pair of

• Attack 17mm Round Wafer Headlights
• Attack 19mm Rectangular Wafer Headlights
• Attack Halo Headlights
• NEW Attack 7-LED Wafer Strip Light

OR

• 4 pairs of Attack Spot Lights, original Attack Headlights, Attack Rock Lights, or Attack 9mm Wafer Lights

User Guide

• Lights High Power LEDs
• Aircraft Modes
• Automatic Hazard Lights
• Blink Patterns
• Waterproof

UF-7R Lighting Controller

The UF-7R Lighting Controller is the newest step in the progression of our UF-7 LED Light Controller - the Lighting Controller that help create MyTrickRC!

The original UF-7's rock solid electronics and software, together with its Plug & Play design, and simple operation made it the obvious choice for RC enthusiasts across the RC hobby. We used it exclusively in our original Light Kits. The electronics in the original UF-7 were tough and reliable both by design and we didn't and still don't cut corners on materials or components.

After many years of success with the UF-7, we discovered that with a few simple tweaks, we could make it even better - greatly enhancing it's overall performance and value!

The UF-7R Controller uses the exact same rock solid electronics as the original UF-7, but with four small, but powerful, upgrades:

First, we changed the MODE Button to be Waterproof, making the UF-7R Fully Waterproof!

Then, we also upgraded all the connectors on the UF-7R Lighting Controller to be gold plated, further enhancing their long term contact performance, particularly around water!

But we didn't stop there, we also upgraded the Pigtail output to support up to 2 Amps of current! This means the UF-7R can power Light Bars, Rock Lights, Halos, or MyTrickRC High Power Lights, and even certain Light Bars from Other Brands**! Yes, that's right, if you already have a Pro-Line, or any light bar that powers off the Receiver, you can power it from the UF-7R! Not only does this reduce the amount of wires to fuss with, the UF-7R Controller has a Plug & Play option that adds Remote On/Off Control of all your LEDs, including the Light Bar!

On the Firmware side of the UF-7R Lighting Controller, we made equally huge improvements. We figured out a completely new way to re-write the UF-7R Controller programming code, unleashing the full potential of the UF-7R Controller's microcontroller and onboard memory to greatly expand the LED blink functions in EVERY MODE. So all the MODEs on the UF-7R got more blink features added to them. Some examples of features we added are*: Off Road MODEs with Optional Remote On/Off Control, Center Brake Light, Backfire, Automatic Hazard Lights, additional Emergency Strobes, Scale Warbird with Switchable Wig-Wag Landing Lights and so much more!

What's Included

• 1pc UF-7R Controller
• 1pc UF-7 Servo Y-Cable
• 1pc UF-7 9V Battery Adapter
• Mounting Hardware

Specifications

Power Input: 4.5-12VDC, 2A MAX

NOTES

1. UF-7C Controller's Pigtail Output passes Receiver Power straight through it. Therefore the voltage on the Pigtail Output will be the same as your Receiver. CAUTION - Do Not draw more power than your Receiver's rating.
2. UF-7R Controller's Port E (Headlights Port) can be used to power Headlights and/or Running Lights. Port E stays ON STEADY in all Land Vehicle MODEs.
3. Each port on the UF-7R Controller can power LOTs of LEDs, but the more LEDs you add to one port, the dimmer all of them will become because they must share the power. We recommend trying not to exceed 4 LEDs per UF-7R Controller LED Output.
4. A Higher Input Voltage on the UF-7R will make all of your LEDs slightly Brighter, However it's better for the Controller if you don't exceed 9VDC.
5. MyTrickRC offers LED Splitter Cables which allow you to add more LEDs to a Port. However, you can't mix all LED colors together on one LED Splitter. Please see our NOTEs about this on the individual LED Splitter Product Pages. You can find LED Splitters here: https://mytrickrc.myshopify.com/collections/cables

* The NEW Blink features we mentioned are only in certain MODEs

** The UF-7R Controller Can Power:

• 1pc Attack 5" or 6" Light Bar, or Light Bar from Other Manufacturer

OR 1 pair of

• Attack 17mm Round Wafer Headlights
• Attack 19mm Rectangular Wafer Headlights
• Attack Halo Headlights
• NEW Attack 7-LED Wafer Strip Light

OR

• 4 pairs of Attack Spot Lights, original Attack Headlights, Attack Rock Lights, or Attack 9mm Wafer Lights

User Guide

• Lights High Power LEDs
• Staged Turn On Lighting
• Automatic Hazard Lights
• Blink Patterns
• Waterproof

Drift-X Controller

Inspired and Proven by the Los Angeles RC Drift Scene, MyTrickRC's Drift-X Controller builds on our successful UF-7 Controller line by adding sweet features designed specifically for Drift Cars!

With 9 Blink Patterns for Scale Drift Cars to Scale Street Cars, including wild RC Drift Patterns like Crossfire, Alien, and Wig Wag, the Drift-X Controller offers tons of Lighting Configuration Options!

The Drift-X Controller features our finely tuned Throttle Response Backfire which flashes a super-realistic Scale Backfire when you let off the Throttle. And most Blink Modes have Automatic Hazard Lights where all appropriate LEDs start to blink in a Hazard Light fashion 30 seconds after your car stops - also great for Scale Emergency Vehicles which just arrived as First Responders!

For Scale Street Cars, the Drift-X Controller offers Two Versions of Turn Signal: normally OFF/blink ON when turning OR normally DIM/blink BRIGHT when turning.

You can even use a 3rd Channel to Control your Drift Patterns!

And since the Drift-X Controller shares the same Rock Solid Electronics as the latest and greatest generation of our tried and true UF-7 Controller product line, it has the same Plug & Play Design, and Simple Operation which has made MyTrickRC the obvious choice for RC Enthusiasts across the RC Hobby. The Original UF-7 Electronics were already Tough and Reliable by design since we don't cut corners on materials or components. For this new generation, we've made improvements such as making the Controller Waterproof, upgrading all connectors to be Gold Plated to further enhance long term contact performance, and increasing the Pigtail output to support up to 2 Amps of current!

The Drift-X Controller includes:

• 1pc Drift-X Controller
• 1pc Servo Y-Cable
• 1pc 9V Battery Adapter
• Mounting Hardware

NOTES

1. The Power Ratings for the Drift-X Controller are: 4.5-12VDC, 2 Amps MAX.
2. Drift-X Controller's Pigtail Output passes Receiver Power straight through it. Therefore the voltage on the Pigtail Output will be the same as your Receiver. CAUTION - Do Not draw more power off your receiver than it's rated for.
3. Drift-X Controller's Port E (Headlights Port) can be used to power Headlights and/or Running Lights. Port E stays ON STEADY in all Land Vehicle MODEs.
4. Each port on the Drift-X Controller can power LOTs of LEDs, but the more LEDs you add to one port, the dimmer all of them will become. We recommend trying not to exceed 4 LEDs per Drift-X Controller LED Output.
5. A Higher Input Voltage on the Drift-X will make all of your LEDs slightly Brighter, However it's better for the Controller if you don't exceed 9VDC.
6. MyTrickRC sells LED Splitter Cables which allow you to add more LEDs to a port. However, you can't mix all LED colors together on one LED Splitter. Please see our NOTEs about this on the individual LED Splitter Product Pages. You can find LED Splitters here: https://mytrickrc.myshopify.com/collections/cables

* The NEW Blink features we mentioned are only in certain MODEs

** The Drift-X Controller Can Power:

• 1pc Attack 5" or 6" Light Bar, or Light Bar from Other Manufacturer

OR 1 pair of

• Attack 17mm Round Wafer Headlights
• Attack 19mm Rectangular Wafer Headlights
• Attack Halo Headlights
• NEW Attack 7-LED Wafer Strip Light

OR

• 4 pairs of Attack Spot Lights, original Attack Headlights, Attack Rock Lights, or Attack 9mm Wafer Lights

User Guide

• Specialized for RC Drift
• Scale Backfire
• Automatic Hazard Lights
• Exotic Blink Patterns
• Two Turn Signal Styles

SQ-1 Controller

MyTrickRC's SQ-1 Controller was born out of LA's RC Drift Scene!

With direct input from LA's Local expert RC Drifters, Tracks, and other drifters around the country, MyTrickRC Crafted a Compact Controller that packs a Big Punch! With Killer Features like Throttle Sensitive Backfire, Active Brake Lights, Reverse, Running Lights, and Automatic Hazard Lights, the SQ-1 definitely takes it to the Next Level!

And, check this out, you can use MyTrickRC's Dual LEDs on every single output. Meaning, you can have Dual Exhaust Backfire, up to 4 Tail/Brake Lights, 4 Headlights, 2 Reverse, and 2 Front Running. And we took it one step further and made the SQ-1 Fully Waterproof! So not only is the SQ-1 Controller Awesome for Drift Cars, it's equally Awesome for Scale Rock Crawlers, Bashers, Boats, Trailers, Buggies, or ANY RC Vehicle that uses 3mm & 5mm LEDs.

With the Backfire Feature and Tail/Brake Lights, the SQ-1 is Awesome on a Short Course Truck, Buggy, or ANY other High Speed On Road or Off Road Vehicle! Also, the SQ-1 Controller is fully Plug and Play.

It's really hard to beat the Value of the SQ-1 Controller. Not only is the SQ-1 Controller jam packed with Awesome Features, the Price is Equally Awesome. And, when you consider the Minimal Wiring, Simplicity to Install & Use, and the MyTrickRC name behind it, you can see the Value of the SQ-1 Controller.

What's Included

• 1pc SQ-1 Controller
• 1pc SQ-1 Servo Y-Cable
• Mounting Hardware

NOTES

1. The SQ-1 Controller is only meant to power MyTrickRC Single and Dual 3mm and 5mm LEDs.
2. If you want all the Same Cool Features as the SQ-1, but also want to power some High Power LEDs, then check out our UF-7C Controller. The UF-7C Controller is the SQ-1 Controller's Big Brother, and is the most Versatile Controller MyTrickRC makes for Scale RC Vehicles!

Specifications

• Input: 4.5-9VDC 1A MAX
• Outputs: 2.7VDC +/-0.1V 0.1A MAX

User Guide

• Compact for RC Drift
• Scale Backfire
• Active Tail/Brake Lights
• Automatic Hazard Lights
• Supports Dual LEDs

Mini Pro Light Kit

Competition Inspired and Compact in size, MyTrickRC’s Mini Pro Light Kit gives you just what you need to light your way past the competition.

Pro Rock Lights

Our scale Pro Rock Lights have four intensely bright lamps (one for each corner) to light up the whole undercarriage of your rig, flooding the rocks with light so you can grab that perfect line. The pods are grouped onto a single plug so they only take up a single High Power Port without needing any splitter cables.

Mini Compact 4-Output Lighting Controller

At the heart of this Light Kit is our MC-4 Lighting Controller. This powerful yet compact device lets you safely power your Rock Lights from a variety of power sources, while having spare output Ports so you can add more lights whenever you’re ready to expand.

Expandable Options for Adding More LEDs

The MC-4 has two High Power Ports (Black) and two Low Power Ports (White). You’ll use one of the black High Power Ports for the Pro Rock Lights, leaving you with a whole other High Power Port plus both Low Power Ports for future expansion. Want to add a Light Bar or Headlights or Tail Lights? The MC-4 lets you do this.

Each High Power Port (Black) can handle powering:

• 1pc Attack 5" or 6" Light Bar

OR 1 pair of

• Attack 17mm Round Wafer Headlights
• Attack 19mm Rectangular Wafer Headlights
• NEW Attack 7-LED Wafer Strip Light
• Attack Halo Headlights

OR

• 4 pairs of Attack Spot Lights, original Attack Headlights, Attack Rock Lights, or Attack 9mm Wafer Lights!

Each Low Power Port (White) can handle powering:

• 5mm or 3mm LEDs

MC-4 is a simple and safe way to add a Light Bar or Wafer Headlights to your rig. The compact size makes it easy to find a place to put it.

Flexible Options for Power Input

Our tiny MC-4 Lighting Controller gives you plenty of options for powering it. First, you can use the included Receiver/Servo Power Cable to power directly off your vehicle’s Receiver or Servo. Or you can add one of our Balance Port Power Connectors to power off either a 2S or 3S Battery Balance Port. MC-4 will safely accept the voltage coming from any of these and regulate it to 5VDC. That way if, say, your Receiver is outputting 7.4V, it’s not a problem - MC-4 will ensure your Attack Light Bars see only 5V and safely operate at their designed condition.

What's Included:

• 1pc Pro Rock Lights (4 lamp Pods on 1 High Power Plug)
• 1pc MC-4 Lighting Controller
• 1pc Receiver Power Cable
• Zip Ties & Screws for mounting

Specifications

Input: 4.5-12VDC (supports 2S and 3S batteries)

Output: 4.9VDC +/-0.1V  1.2Amp MAX

CAUTION

Do NOT plug 3mm and 5mm LEDs into the Black High Power Ports - it will burn them up immediately! Do not connect more lights than your Receiver and ESC are rated for.

User Guide

• Pro Rock Lights
• Lights High Power LEDs
• Lights Standard LEDs
• Compact, Rugged
• Low Cost, Expandable

Vanquish Optic Light Kit

MyTrickRC's Vanquish Optic Light Kit is the perfect complement to your Vanquish H10 Optic trail buggy. This Kit features a sleek and rugged, light weight Custom Headlight Assembly with integrated High Intensity Headlights along with our new Scale Tail Light Bar. The Vanquish Optic Light Kit also comes with two pairs of Attack Rock Light Pods and the compact HB-2 Lighting Controller. It powers off your vehicle's battery balance port - 2S and 3S balance port adapters included. You can also power this kit directly off your vehicle's receiver with our optional Adapter Cable: https://mytrickrc.com/collections/cables/products/hb-2receiverpowercable

For that ultimate in scale look, add an optional TrickWhip Light in the color of your choice. Shown above we see the Optic rocking a red TrickWhip.

Features

• Simple, hassle-free operation
• Easy Assembly and Installation
• Manual On/Off Light Control
• In-Line Quick Disconnect to Battery

What's Included

• Pre-assembled Custom Scale Headlight Module with Built-In:
• High Brightness Quad-LED Headlights
• Protective Polycarbonate Clear Lenses
• New Pre-assembled Custom Scale Tail Light Bar with Built-In:
• Two 27mm Red LED Strip Lights
• Red Lenses
• 2-Pair Attack Spot Lights for Rock Lights
• 1-HB-2 Lighting Controller
• 2-Way LED Splitter
• Mounting Screws and Zip Ties

Installing your Light Kit

Before we can do anything, first we must remove the roof panel.

Zip tie the Tail Light Bar to the roll cage and run its wires across and down the B pillar as shown.

If you purchased an optional TrickWhip Light, screw it to the cage with a P-clip and feed its wire down as shown.

Zip tie the Rock Lights to the lower cage facing the rear wheels like this.

Next, remove the Hood Panel.

Zip tie the front Rock Lights to the frame and feed their wire down as shown.

Now unscrew the Grill from underneath.

Place our Custom Headlight Assembly into the Headlight Grill like so.

Being careful not to pinch any wires, re-attach the Headlight Grill, Hood, and Roof. Feed wires to the passenger side battery pocket side Panel.

Connect the lights to the HB-2 Lighting Controller.

NOTE - Run all LED wires to passenger side of vehicle. - Use 2-Way LED Splitter for Rock Lights, leaving one port on the HB-2 for other high power accessories, such as a future Light Bar, for example. Or you can add a TrickWhip Light by plugging it through a 5V to 3V Regulator.

• Scale Headlights
• Scale Tail Light Bar
• 2pair Rock Light Pods
• Super Bright, Plug & Play
• HB-2 Controller

Axial Jeep CJ-7 Deluxe Light Kit

Level up your Axial SCX10 III Jeep CJ-7 with MyTrickRC's Axial Jeep CJ-7 Deluxe Light Kit! The Axial Jeep CJ-7 Deluxe Light Kit is a compact and powerful Light Kit that will blast light all around where you are crawling. This Deluxe Light Kit is jam packed full of awesome Lights and Features including High Power Vintage colored Halogen Headlights, Super Bright A-Pillar Ditch Light Pods, and four High Intensity Rock Lights. The Axial Jeep CJ-7 Deluxe Light Kit also includes functional Tail/Brake Lights as well as Front Orange Running Lights. The incredible scale look of the Axial Jeep CJ-7 Deluxe Light Kit will grab attention on and off the trail.

In addition to all the great LEDs, the Axial Jeep CJ-7 Light Deluxe Kit is Plug and Play! This Kit is based around the DG-1 Dragon II Lighting Controller. The powerful and well proven DG-1 Dragon Controller is a long time favorite loved by thousands of MyTrickRC Customers. The Dragon can handle as many High Power lights as you may need and do it very efficiently! The Dragon's High Tech electronics maximize lumens of light while minimizing power usage. Also, the Dragon offers both Manual and Remote On/Off/Brightness Control, so you can quickly and easily manage your battery usage. A key feature of the Dragon is that is has four level On/Off-Brightness Level modes. You can choose Running Lights Only, or Three Levels of Brightness Control on the High Power outputs. The Dragon also has Smart Battery Monitoring to prevent you from over discharging your battery when you're getting low on charge. Nothing comes close the amount of Light Output and Scale Realism of MyTrickRC's Axial Jeep CJ-7 Light Kit. Plus, the Axial Jeep CJ-7 Light Kit is totally expandable. If you ever want to add more Lighting Accessories, such as Interior Lights, Dash Lights, Light Bar, Camping Lights, it's no problem! The Axial Jeep CJ-7 Deluxe Light Kit will make your crawling safer and more fun!

Another original feature that the Dragon offers is inline Quick Disconnect, so it's super easy to separate your vehicle Body from the Chassis.

Planning on running in water? Good News! The Dragon is Waterproof. Top Tip: To increase your overall light system's water resistance, add a small dab of di-electric grease to the Dragon's Output Port connectors before plugging in the LEDs. NOTE: The A-Pillar Pods can handle water exposure; however, they don't have a waterproof housing design, so avoid submerging them in water, or dirt may get inside and become visible on the clear lens.

The Axial Jeep CJ-7 Deluxe Light Kit get its power directly from your battery, and is Compatible with 2S and 3S batteries.

Axial Jeep CJ-7 Deluxe Light Kit Features

• Hi Performance Proven Light System Components
• High Power Vintage-look Headlights
• High Power A-Pillar Ditch Lights
• High Power Rock Lights
• Red Tail/Brake Lights
• Orange Front Running Lights
• Easy Plug & Play Installation
• Industry Leading Crazy Bright LEDs
• Remote & Manual On/Off & Adjustable Brightness
• Functional Brake Lights
• Waterproof
• Wicked Cool Scale Kit

What's Included

• 1 pair Attack Halogen Headlights
• 1 pair SP4 Light Pods for A-Pillar Ditch Lights
• 2 pair High Power Rock Lights
• 1 pair Dual 5mm Red Tail/Brake Light LEDs
• 1 pair Dual 5mm Orange Front Running Light LEDs
• 1 pc EZ6 LED Splitter
• 1 pc 2-Way LED Splitter with Quick Disconnect for Rock Lights
• DG-1 Dragon II Lighting Controller
• 2 pair Mounting Adapter Brackets for Rock Lights
• Zip Ties and Zip Tie Mounts for clean wiring management
• Attack Scale Bumper Stickers

Installation Pictures

• High Power Headlights
• A-Pillar Light Pods
• Rock Lights
• Tail/Brake Lights
• DG-1 Controller

Losi Promoto Motorcycle Light Kit

Amp up your Promoto Motorcycle with MyTrickRC's Losi Promoto Motorcycle Light Kit! The Losi Promoto Motorcycle Light Kit is a sleek and simple Light Kit that's a snap to install and has Nice Bright Light Pods in front and a Sleek Tail Light Pod tucked up inside the rear fender. The mounting locations of the LEDs on the Losi Promoto Motorcycle Light Kit were chosen to protect them from impacts. The locations are away from the bikes normal high impact, wear areas.  Additionally, the LEDs on the Losi Promoto Motorcycle Light Kit meet MyTrickRCs standard for Crazy Brightness, even in broad daylight.

NOTES:

This Kit powers directly off the Receiver.

The Tail Light includes an strong Adhesive Pad for installation, however, if you want added security in the adhesion to the rear fender, also adding some Zap Goo, Shoe Goo, or E-6000 around a couple edges works very well for these parts. These adhesives bond to both parts well.

**Be sure the rear fender is very clean before applying the Tail Light Pod. Clean the Promoto's rear fender with isopropyl alcohol (rubbing alcohol). Clean surface twice, allow the alcohol dry fully, then install Tail Light Pod by pressing the adhesive pad on the Tail Light Pod firmly in place. It takes about 24hrs for the adhesive pad to fully bond to both parts. Use the bike gently during these 24hrs after installing the tail light pod.

Features:

• Simple, hassle-free operation
• EasyAssembly and Installation
• Custom made kit compliments the Promoto's rad styling
• LEDs are very Bright and Functional Day and Night
• Powers On/Off with the Bike

Kit Includes:

• 1-Pair SP4 High Brightness Light Pods
• 1-Tail Light Pod
• 1-PAL3 Power Supply

Installation:

Remove Left Side Panel.

Connect the Light Pod to the Power Supply and place as shown. Connect the Light Pods to either black connector on the Power Supply.  You can use double back tape, Zap Goo, Shoe Goo, or E-6000 to bond the Power Supply to the bike.

Next feed Tail Light wire though the small hole in the metal plate on the side of the bike, as shown. Connect the Tail Light to the white port on the Power Supply.

Light Kit is now installed. Re-Install Motor Cover and Left Side Panel, you are DONE!

• Super Bright SP4 Pods
• Tail Light Pod
• PAL3 Power Supply
• Simple Install
• Expandable

ProLine Power Wagon Light Kit

MyTrickRC's Pro-Line Power Wagon Light Kit is the perfect complement to your competition rig. This Kit features a sleek and rugged, light weight Grill with integrated High Intensity Headlights. The Pro-Line Power Wagon Light Kit also comes with two pairs of Attack Rock Light Pods and the compact HB-2 Lighting Controller. The Pro-Line Power Wagon Light Kit powers off your vehicle's Receiver and is Plug and Play.

Features

• Simple, hassle-free operation
• Easy Assembly and Installation
• In-Line Quick Disconnects between Body and Chassis

What's Included

• Custom Scale Grill with Built-In:
• 1-Pair 27mm LED Strip Lights
• 1-Pair Clear Lenses
• 2-Pair Attack Spot Lights for Rock Lights
• 1-HB-2 Lighting Controller
• Mounting Screws and Zip Ties

Scale Grill Installation

Step one is to cut an opening in your body for slipping in the Grill. The Grill has a slot on the top and sides for sliding into the body.

Note: Cut right on the edge of where the body dips down into the Grill area. Use the Grill as a template and Be Careful not to cut away too much! The Grill is slotted so that it can slide into the cut body. Before cutting, use the Grill as a guide to confirm where to cut.

You can now slide your Grill/Light assembly into your vehicle body. We recommend securing it with a silicone-based adhesive such as Zap Goo, E-6000, Shoe Goo or equivalent.

• Scale Grill
• Super Bright Strip Lights
• 2pair Rock Light Pods
• HB-2 Controller
• Plug and Play