UF-7C Controller

MyTrickRC's UF-7C Controller was born out of its earlier cousin, our original UF-7 Controller. The success of the UF-7 Controller literally created MyTrickRC! The original UF-7's Rock Solid Electronics and Software, together with it's Plug & Play Design, and Simple Operation made it the obvious choice for RC Enthusiasts across the RC Hobby. We used it exclusively in our Original Light Kits. The Electronics in the original UF-7 were Tough and Reliable both by design and we don't cut corners on materials or components.

After many years of excellent success with the UF-7, we discovered that with a few simple tweaks, we could make it even better and greatly enhance its Overall Performance and Value. The UF-7C Controller uses the exact same Rock Solid Electronics as the original UF-7, but with four small, but powerful, upgrades. First we changed the MODE Button to be Waterproof, making the UF-7C Fully Controller Waterproof! Then we also upgraded all the connectors on the UF-7C Controller to be Gold Plated, further enhancing their long term contact performance, particularly around water! But we didn't stop there, we also upgraded the PigTail Output to support up to 2 Amps of Current! This means the UF-7C can Power Light Bars, Rock Lights, Halos, or MyTrickRC High Power Lights, and even certain Light Bars from Other Brands**! Yes, that's right, if you already have a Proline, or Any Light Bar that powers off the Receiver, you can power it from the UF-7C! Not only does this reduce the amount of wires to fuss with, the UF-7C Controller has a Plug & Play option that adds Remote On/Off Control of all your LEDs, including the Light Bar!

On the Software side of the UF-7C Controller, we made equally huge improvements! We figured out a completely new way to re-write the UF-7C Controller programming code, unleashing the full potential of the UF-7C Controller's Micro-Processor and onboard Memory to greatly expand the LED Blink Functions in EVERY MODE. So all the MODEs on the UF-7C got more blink features added to them. Some examples of features we added are*: Off Road MODEs with Optional Remote On/Off Control, Center Brake Light, Backfire, Automatic Hazard Lights, additional Emergency Strobes, Scale Warbird with Switchable Wig-Wag Landing Lights and so much more!

The UF-7C Controller includes:

• 1pc UF-7C Controller
• 1pc Servo Y-Cable
• 1pc 9V Battery Adapter
• Mounting Hardware

NOTES

1. The Power Ratings for the UF-7C Controller are: 4.5-12VDC, 2 Amps MAX.
2. UF-7C Controller's Pigtail Output passes Receiver Power straight through it. Therefore the voltage on the Pigtail Output will be the same as your Receiver. CAUTION - Do Not draw more power off your receiver than it's rated for.
3. UF-7C Controller's Port E (Headlights Port) can be used to power Headlights and/or Running Lights. Port E stays ON STEADY in all Land Vehicle MODEs.
4. Each port on the UF-7C Controller can power LOTs of LEDs, but the more LEDs you add to one port, the dimmer all of them will become. We recommend trying not to exceed 4 LEDs per UF-7C Controller LED Output.
5. A Higher Input Voltage on the UF-7C will make all of your LEDs slightly Brighter, However it's better for the Controller if you don't exceed 9VDC.
6. MyTrickRC sells LED Splitter Cables which allow you to add more LEDs to a port. However, you can't mix all LED colors together on one LED Splitter. Please see our NOTEs about this on the individual LED Splitter Product Pages. You can find LED Splitters here: https://mytrickrc.myshopify.com/collections/cables

* The NEW Blink features we mentioned are only in certain MODEs

** The UF-7C Controller Can Power:

• 1pc Attack 5" or 6" Light Bar, or Light Bar from Other Manufacturer

OR 1 pair of

• Attack 17mm Round Wafer Headlights
• Attack 19mm Rectangular Wafer Headlights
• Attack Halo Headlights
• NEW Attack 7-LED Wafer Strip Light

OR

• 4 pairs of Attack Spot Lights, original Attack Headlights, Attack Rock Lights, or Attack 9mm Wafer Lights

• Waterproof
• Lights High Power LEDs
• Automatic Hazard Lights
• Blink Patterns
• Aircraft Modes

UF-7R Controller

The UF-7R LED Light Controller is the progression of our UF-7 LED Light Controller - the Lighting Controller that help create MyTrickRC!

The original UF-7's rock solid electronics and software, together with its Plug & Play design, and simple operation made it the obvious choice for RC enthusiasts across the RC hobby. We used it exclusively in our original Light Kits. The electronics in the original UF-7 were tough and reliable both by design and we don't cut corners on materials or components.

After many years of success with the UF-7, we discovered that with a few simple tweaks, we could make it even better, by greatly enhancing it's overall performance and value!

The UF-7R Controller uses the exact same rock solid electronics as the original UF-7, but with four small, but powerful, upgrades:

First, we changed the MODE Button to be Waterproof, making the UF-7R Fully Controller Waterproof!

Then, we also upgraded all the connectors on the UF-7R Controller to be gold plated, further enhancing their long term contact performance, particularly around water!

But we didn't stop there, we also upgraded the Pigtail output to support up to 2 Amps of current! This means the UF-7R can power Light Bars, Rock Lights, Halos, or MyTrickRC High Power Lights, and even certain Light Bars from Other Brands**! Yes, that's right, if you already have a Proline, or Any Light Bar that powers off the Receiver, you can power it from the UF-7R! Not only does this reduce the amount of wires to fuss with, the UF-7R Controller has a Plug & Play option that adds Remote On/Off Control of all your LEDs, including the Light Bar!

On the Software side of the UF-7R Controller, we made equally huge improvements. We figured out a completely new way to re-write the UF-7R Controller programming code, unleashing the full potential of the UF-7R Controller's Micro-Processor and onboard memory to greatly expand the LED blink functions in EVERY MODE. So all the MODEs on the UF-7R got more blink features added to them. Some examples of features we added are*: Off Road MODEs with Optional Remote On/Off Control, Center Brake Light, Backfire, Automatic Hazard Lights, additional Emergency Strobes, Scale Warbird with Switchable Wig-Wag Landing Lights and so much more!

The UF-7R Controller includes:

• 1pc UF-7R Controller
• 1pc Servo Y-Cable
• 1pc 9V Battery Adapter
• Mounting Hardware

NOTES

1. The Power Ratings for the UF-7R Controller are: 4.5-12VDC, 2 Amps MAX.
2. UF-7C Controller's Pigtail Output passes Receiver Power straight through it. Therefore the voltage on the Pigtail Output will be the same as your Receiver. CAUTION - Do Not draw more power off your receiver than it's rated for.
3. UF-7R Controller's Port E (Headlights Port) can be used to power Headlights and/or Running Lights. Port E stays ON STEADY in all Land Vehicle MODEs.
4. Each port on the UF-7R Controller can power LOTs of LEDs, but the more LEDs you add to one port, the dimmer all of them will become. We recommend trying not to exceed 4 LEDs per UF-7R Controller LED Output.
5. A Higher Input Voltage on the UF-7R will make all of your LEDs slightly Brighter, However it's better for the Controller if you don't exceed 9VDC.
6. MyTrickRC sells LED Splitter Cables which allow you to add more LEDs to a Port. However, you can't mix all LED colors together on one LED Splitter. Please see our NOTEs about this on the individual LED Splitter Product Pages. You can find LED Splitters here: https://mytrickrc.myshopify.com/collections/cables

* The NEW Blink features we mentioned are only in certain MODEs

** The UF-7R Controller Can Power:

• 1pc Attack 5" or 6" Light Bar, or Light Bar from Other Manufacturer

OR 1 pair of

• Attack 17mm Round Wafer Headlights
• Attack 19mm Rectangular Wafer Headlights
• Attack Halo Headlights
• NEW Attack 7-LED Wafer Strip Light

OR

• 4 pairs of Attack Spot Lights, original Attack Headlights, Attack Rock Lights, or Attack 9mm Wafer Lights

• Waterproof
• Lights High Power LEDs
• Staged Turn On Lighting
• Automatic Hazard Lights
• Blink Patterns

Drift-X Controller

Inspired and Proven by the Los Angeles RC Drift Scene, MyTrickRC's Drift-X Controller builds on our successful UF-7 Controller line by adding sweet features designed specifically for Drift Cars!

With 9 Blink Patterns for Scale Drift Cars to Scale Street Cars, including wild RC Drift Patterns like Crossfire, Alien, and Wig Wag, the Drift-X Controller offers tons of Lighting Configuration Options!

The Drift-X Controller features our finely tuned Throttle Response Backfire which flashes a super-realistic Scale Backfire when you let off the Throttle. And most Blink Modes have Automatic Hazard Lights where all appropriate LEDs start to blink in a Hazard Light fashion 30 seconds after your car stops - also great for Scale Emergency Vehicles which just arrived as First Responders!

For Scale Street Cars, the Drift-X Controller offers Two Versions of Turn Signal: normally OFF/blink ON when turning OR normally DIM/blink BRIGHT when turning.

You can even use a 3rd Channel to Control your Drift Patterns!

And since the Drift-X Controller shares the same Rock Solid Electronics as the latest and greatest generation of our tried and true UF-7 Controller product line, it has the same Plug & Play Design, and Simple Operation which has made MyTrickRC the obvious choice for RC Enthusiasts across the RC Hobby. The Original UF-7 Electronics were already Tough and Reliable by design since we don't cut corners on materials or components. For this new generation, we've made improvements such as making the Controller Waterproof, upgrading all connectors to be Gold Plated to further enhance long term contact performance, and increasing the Pigtail output to support up to 2 Amps of current!

The Drift-X Controller includes:

• 1pc Drift-X Controller
• 1pc Servo Y-Cable
• 1pc 9V Battery Adapter
• Mounting Hardware

NOTES

1. The Power Ratings for the Drift-X Controller are: 4.5-12VDC, 2 Amps MAX.
2. Drift-X Controller's Pigtail Output passes Receiver Power straight through it. Therefore the voltage on the Pigtail Output will be the same as your Receiver. CAUTION - Do Not draw more power off your receiver than it's rated for.
3. Drift-X Controller's Port E (Headlights Port) can be used to power Headlights and/or Running Lights. Port E stays ON STEADY in all Land Vehicle MODEs.
4. Each port on the Drift-X Controller can power LOTs of LEDs, but the more LEDs you add to one port, the dimmer all of them will become. We recommend trying not to exceed 4 LEDs per Drift-X Controller LED Output.
5. A Higher Input Voltage on the Drift-X will make all of your LEDs slightly Brighter, However it's better for the Controller if you don't exceed 9VDC.
6. MyTrickRC sells LED Splitter Cables which allow you to add more LEDs to a port. However, you can't mix all LED colors together on one LED Splitter. Please see our NOTEs about this on the individual LED Splitter Product Pages. You can find LED Splitters here: https://mytrickrc.myshopify.com/collections/cables

* The NEW Blink features we mentioned are only in certain MODEs

** The Drift-X Controller Can Power:

• 1pc Attack 5" or 6" Light Bar, or Light Bar from Other Manufacturer

OR 1 pair of

• Attack 17mm Round Wafer Headlights
• Attack 19mm Rectangular Wafer Headlights
• Attack Halo Headlights
• NEW Attack 7-LED Wafer Strip Light

OR

• 4 pairs of Attack Spot Lights, original Attack Headlights, Attack Rock Lights, or Attack 9mm Wafer Lights

• Specialized for RC Drift
• Scale Backfire
• Automatic Hazard Lights
• Exotic Blink Patterns
• Two Turn Signal Styles

SQ-1 Controller

MyTrickRC's SQ-1 Controller was born out of LA's RC Drift Scene! 

With direct input from LA's Local expert RC Drifters, Tracks, and other drifters around the country, MyTrickRC Crafted a Compact Controller that packs a Big Punch!  With Killer Features like Throttle Sensitive Backfire, Active Brake Lights, Reverse, Running Lights, and Automatic Hazard Lights, the SQ-1 definitely takes it to the Next Leve!   

And, check this out, you can use MyTrickRC's Dual LEDs on every single output.  Meaning, you can have Dual Exhaust Backfire, up to 4 Tail/Brake Lights, 4 Headlights, 2 Reverse, and 2 Front Running.  And we took it one step further and made the SQ-1 Fully Waterproof! So not only is the SQ-1 Controller Awesome for Drift Cars, it's equally Awesome for Scale Rock Crawlers, Bashers, Boats, Trailers, Buggies or literally ANY RC Vehicle that uses 3mm & 5mm LEDs.   

With the Backfire Feature and Tail/Brake Lights, the SQ-1 is Awesome on a Short Course Truck, Buggy , or ANY other High Speed On Road or Off Road Vehicle! Also, the SQ-1 Controller is fully Plug and Play. 

It's really hard to beat the Value of the SQ-1 Controller.  Not only is the SQ-1 Controller jammed packed with Awesome Features, the Price is Equally Awesome.  And, when you consider the Minimal Wiring, Simplicity to Install & Use, and the MyTrickRC name behind it, you can see the Value of the SQ-1 Controller.

The SQ-1 Controller Includes:

• 1pc SQ-1 Controller 
• 1pc Servo Y-Cable 
• Mounting Hardware

NOTES

1. The Power Ratings for the SQ-1Controller  are: 4.5-9VDC, 1 Amp MAX.
2. The SQ-1 Controller is only meant to power MyTrickRC Single and Dual 3mm and 5mm LEDs.
3. If you want all the Same Cool Features as the SQ-1, but also want to power some High Power LEDs, then check out our UF-7C Controller. The UF-7C Controller is the SQ-1 Controller's Big Brother, and is the most Versatile Controller MyTrickRC makes for Scale RC Vehicles!  

• Compact for RC Drift
• Scale Backfire
• Active Tail/Brake Lights
• Automatic Hazard Lights
• Supports Dual LEDs

CX-1 Controller

The MyTrickRC CX-1 Controller is a mighty power in small package.  The clever little controller can power both MyTrickRC High Power LEDs and standard 3mm or 5mm LEDs.   

The CX-1 Controller gives you a Simple, Easy, and Safe, way to add LEDs to any RC Vehicles. The  CX-1 Controller powers directly off any open port on your receiver, and regulates that power to your LEDs.  

So you don't ever need to worry about over powering, or damaging, from mis-wiring.   The electronics in the CX-1 are very rugged and meet MyTrickRC's strict Quality Requirements.  

The CX-1 Controller Includes:

• 1pc CX-1 Controller 

NOTES

1. The Power Ratings for the cx-1 Controller  are: 5VDC MAX.

• Compact for Tiny Trucks
• Simple, Easy, & Safe
• Lights High Power LEDs
• Lights Standard LEDs
• Low Cost 5VDC System