ARRMA Mojave Grom Light Kit

Pre-Order Now! Shipping Late May

MyTrickRC's ARRMA Mojave Grom Light Kit is the perfect scale complement to your 1/16th scale ARRMA Mojave Grom desert truck. Super Bright Attack Strip Headlights mounted in a rugged custom Scale Grill light your way. Your competition can stare at Red Attack Strip Tail Lights in a Scale Bumper as you pull away.

Features

• Custom Scale Headlight Grill
• High Brightness Attack Strip Headlights
• Custom Scale Tail Light Bumper
• Red Attack Strip Tail Lights
• Simple, hassle-free operation
• Easy Assembly & Installation

What's Included

• High Brightness Attack Strip Headlight Grill
• Red Attack Strip Tail Light Bumper
• Dual Output Attack Light Regulator
• Servo Splitter
• Screws
• Zip Tie & Zip Tie Mount for clean cable managment

Installing your Lights

Here's your Mojave Grom straight out of the box. Let's trick it out with some lights!

Headlight Grill

Remove the three screws for the stock Front Grill.

Here's the stock Front Grill removed.

Grab your Headlight Grill and feed its cable through the front of your Vehicle Body.

Screw in the Headlight Grill.

For a clean install, route the Headlight Cable like so.

Tail Light Grill

Unscrew the stock Rear Bumper assembly's two screws and separate it from the Vehicle Body.

Detach the Cage from the stock Rear Bumper assembly.

Here is the Cage removed.

Attach the Cage to your Tail Light assembly.

Feed the Tail Light Cable through the hole in the Body rear.

Using the original two screws, screw the Tail Lights to the Vehicle Body's vertical attachment points...

and use three new screws from the Kit for the horizontal attachment points.

Connections

Connect the Headlights and Tail Lights to the Attack Light Regulator.

Here is the Vehicle Body with your Lights installed.

Stick the included Zip Tie Mount inside the Body onto the side wall and Zip Tie the cables for a clean install.

Connect the Attack Light Regulator to the Servo Splitter.

Unplug the Fan from the Receiver - our Lights need to share the slot with it.

Connect the Fan to the Servo Splitter.

Then plug the Servo Splitter into the Receiver.

Done! Sit back and admire your handiwork for a bit. Then drive this basher!

• Super Bright
• Scale Headlight Grill
• Scale Tail Lights
• Attack Regulator
• Plug & Play