ARRMA Granite Grom Light Kit

MyTrickRC's ARRMA Granite Grom Light Kit is the perfect scale complement to your 1/18th scale ARRMA Granite Grom monster truck. Super Bright Attack Headlights light your way. The sleek, rugged, and light weight Scale Tail Light Grill houses Red Attack Strip Tail Lights bringing up the rear. Powering these is easy - simply plug them into the included Dual Output Attack Light Regulator and plug that into your Receiver.

Features

• Super Bright Attack Headlights
• Custom Scale Tail Light Grill
• Red Attack Strip Tail Lights
• Simple, hassle-free operation
• Easy Assembly and Installation

What's Included

• Attack Headlights
• Scale Tail Light Grill Module
• Red Attack Strip Tail Lights
• Mounting Screws, Washers, & Nuts
• Dual Output Attack Light Regulator
• Mounting Stickers for mounting Attack Headlights
• Template Sticker for installing Tail Light Grill
• Zip Tie & Zip Tie Mount for clean cable managment

Installing your Lights

Tail Light Grill

We've included a handy Template Sticker to help align your Tail Light Grill to your Vehicle Body. You'll first need to prepare it for use by using a fine tool such as a hobby knife to remove the two Screw Hole circles and the Cable Hole circle.

Align the Template Sticker to the rear of your Vehicle Body like so. Notice the notch which indicates the bottom edge of the Template. You can use this to help center the Template horizontally.

Peel the backing from the Template Sticker and carefully adhere the Sticker to the Body.

Using a Body Reamer, ream holes for the two Mounting Screws.

And ream a hole for feeding the LED Cable through the Vehicle Body.

You might want to clean up the burrs on holes from the inside of the Body. Take care not to enlarge the holes when you are doing this.

This is how the holes should look.

At this point the Template Sticker has done its job and we can now remove it. Now is a good time to remove any adhesive residue the Template Sticker might have left behind.

Now we're ready to feed the Tail Light Cable through the bigger hole.

Peel off the backer from the Red Attack Strip Tail Lights and carefully stick them to the Vehicle Body.

Put a Washer on one of the Mounting Screws, and feed those through the Tail Light Grill and Vehicle Body.

Use needle nose pliers to hold the Mounting Nut steady on the inside of the Body while screwing on the Grill from the outside. Be careful not to cross the threads.

This is how the mounted Tail Light Grill will look from the inside.

Attack Headlights

Using a pointy tool, eyeball and carefully mark the centers of Headlights.

Using a body reamer tool, ream out holes for the Attack Headlights. The holes should be just large enough for the LED to shine through unobstructed without exposing too much else.

Using a hobby knife, clean up the burrs on the inside of the Headlight Holes.

When this step is done, it should look about like this. This step is important to give a clean mounting surface for sticking the Attack Headlights.

Unscrew and remove the Front Grill.

Unscrew and remove the Hood Bracket.

At this point, the cleared out hood area should look like this.

Peel off and apply a Mounting Sticker to each Attack Headlight.

For each Headlight, peel off the other side of the Mounting Sticker and carefully stick the Attack Headlight to the inside of your Vehicle Body.

This is how your Attack Headlights will look when they are installed.

Re-attach the Hood Bracket to the Body, taking care to route the Headlight Cable through the Hood Bracket to keep things tidy. Then re-attach the Front Grill.

Similarly, route the Tail Light Cable through the rear plastic bracket.

Here's how it will look when layed out like an open-faced sandwich. Stick the Cable Clip inside the Body for clean cable management. The Headlights and Tail Lights each plug into the Attack Light Regulator, and then that plugs into the Receiver

Done! Sit back and admire your handiwork.

• Super Bright
• Attack Headlights
• Scale Tail Light Grill
• Red Attack Strip Lights
• Plug & Play