Products
Traxxas K5 Blazer Light Kit HB-2

Traxxas K5 Blazer Light Kit HB-2
With the Traxxas K5 Blazer Light Kit you can quickly and easily setup your K5 Blazer with a trail ready Light System. The Traxxas K5 Blazer Light Kit includes Attack Headlights, Front and Side Marker Lights, Tail Lights, and custom Headlight Bezels. Also, since the Traxxas K5 Blazer Light Kit is based on the HB-2 Controller, it's easy to add Rock Lights, Light Bars, or any of MyTrickRC's Attack Headlights.
Traxxas K5 Blazer Light Kit Features:
- Scale Lighting System including Attack Headlights, Tail Lights, Front and Side Marker Lights
- Custom Headlight Bezels
- Easy Installation - Requires Minimal Tools
Traxxas K5 Blazer Light Kit Includes:
- 1 Pair of Attack High Power Headlights
- 2pcs 3mm Dual Orange LEDs for Front & Side Marker Lights
- 1pc 5mm Dual Red Tail Lights
- Custom Headlight Bezels
- HB-2 Lighting Controller
- Zip Ties and Zip Tie Mounts for clean wiring management
- Attack Scale Bumper Stickers
NOTE - for Traxxas Battery users
A Traxxas Battery Adapter (sku MYK-RTX) is required with this kit if you plan to use a Traxxas Battery on your vehicle.
OPTIONAL - Rock Light available are for this vehicle:
4-LED Rock Light Set
8-LED Rock Light Set
- Attack Headlights
- Marker Lights
- Tail Lights
- Headlight Bezels
- HB-2 Controller
Traxxas TRX4 Bronco Light Kit HB-2

Traxxas TRX4 Bronco Light Kit HB-2
Trick Out your Traxxas TRX4 Bronco with a MyTrickRC Light Kit! This Kit includes our well known Attack High Power Headlights as well as Tail Lights and plenty of Marker Lights. The result is an authentic Scale looking vehicle.
At the heart of this Kit is our HB-2 Lighting Controller which features 6 individual Output Ports (2 High Power, 1 Headlight, and 3 Standard Low Power). These give you plenty of freedom to Expand - easily add one of our super bright Light Bars or Rock Lights or Spot Lights!
Installation is simple Plug and Play - no soldering required. Note that minor modifications to the Body are required for installation.
TRX4 Bronco Light Kit Includes:
- 1 Pair of Attack High Power Headlights
- 1pc 5mm Dual Red Tail Lights
- 1pc 3mm Dual Orange Front Marker Lights
- 1pc 3mm Quad Red/Orange Rear/Front Side Marker Lights
- 1set LED Mounts
- HB-2 Lighting Controller
NOTE - for Traxxas Battery users
A Traxxas Battery Adapter (sku MYK-RTX) is required with this kit if you plan to use a Traxxas Battery on your vehicle.
OPTIONAL - Rock Light available are for this vehicle:
4-LED Rock Light Set
8-LED Rock Light Set
- High Power Headlights
- Tail Lights
- Front Marker Lights
- Side Marker Lights
- HB-2 Controller
Traxxas TRX4 Sport Light Kit HB-2

Traxxas TRX4 Sport Light Kit HB-2
With the Traxxas TRX4 Sport Light Kit you can quickly and easily setup your TRX4 Sport with a trail ready Light System. The Traxxas TRX4 Sport Light Kit includes Custom Tail Light Bezels for the RTR Version, Front Marker Lights, Tail Lights, and Rock Lights!
Also, since the Traxxas TRX4 Sport Light Kit is based on our HB-2 Light Controller, it's easy to add Light Bars or any of MyTrickRC's new Wafer Headlights. Another great thing about the Traxxas TRX4 Sport Light Kit as it can be used on either the RTR or Kit version of the Truck.
Traxxas TRX4 Sport Light Kit Features:
- Scale Lighting System including Attack Headlights, Rock Lights, Tail & Running Lights
- Custom Tail Light Bezels for RTR Body
- HB-2 Light Controller
- Easy Installation - Requires Minimal Tools
Includes:
- 4 Pairs of Attack High Power Headlights & Rock Lights (kit uses Headlights as Rock Lights)
- 1pc 3mm Dual Yellow/Amber Front Marker Lights
- 1pc 5mm Dual Red Tail Lights
- Custom Tail Light Bezels for RTR
- 1pc HB-2 Lighting Controller
- Zip Ties and Zip Tie Mounts for clean wiring management
- MyTrickRC Stickers
NOTE - for Traxxas Battery users
A Traxxas Battery Adapter (sku MYK-RTX) is required with this kit if you plan to use a Traxxas Battery on your vehicle.
- Attack Headlights
- Rock Lights
- Front Marker Lights
- Tail Light Buckets
- HB-2 Controller
Traxxas Ultimate RC Hauler

MyTrickRC's Traxxas Ultimate RC Hauler Kit is the perfect light kit upgrade for your Ultimate RC Hauler Tow Truck.
This incredible kit uses MyTrickRC's new UF-7R Controller. One of the coolest aspects of the Traxxas Ultimate RC Hauler Kit is the UF-7R's flexibility, allowing you to configure your light system different ways depending on how you want it!
By slightly changing the way LEDs are connected, and selecting a different MODE, you can easily configure, or change up your settings. Everything you need for all configurations is included in the kit.
SETUP #1 - Functioning Turn Signals
If you want a scale setup with functioning Turn Signals the Traxxas Ultimate RC Hauler Kit can do that. Set the UF-7R to MODE 7 and connect LEDs as shown:
- Port A - Reverse
- Port B - Left Rear Tail/Brake/Turn (use 2-way cables)
- Port C - Right Rear Tail/Brake/Turn
- Port D - Front Right Turn
- Port E - Headlights
- Port F - Front Left Turn
*This configuration doesn't support On/Off Control of Flasher Bar. MyTrickRC has solution for this coming soon.
SETUP #2 - Staged Lighting Control
Or, if you prefer a setup for Rock Crawling that has Scale Brakes and Reverse, and the ability to power a Flasher Bar then you want setup #2. By connecting UF-7R's Input 2 to the transmission servo, you can use the transmission switch to toggle through staged lighting. Staged lighting starts with all Lights OFF. the first toggle turns on front running lights, Tail/Brake, and Reverse. The next level adds Headlights, and the last level turns our port G which you can use to power a Flasher Bar, and/or High Power LEDs like Rock Lights, or Utility Lights. Set the UF-7R to MODE 3 and connect LEDs as shown:
- Port A - Reverse
- Port B - Blinking (not used)
- Port C - Tail/Brake
- Port D - Front Running Lights
- Port E - Headlights
- Port F - Center Bake (not used)
- Port G - High Power Output (not used)
SETUP #3 - Remotely Controlled Strobes
For Emergency Use Setup with wig-way strobes, set the UF-7R to MODE 10 and connect LEDs as shown:
- Port A - Wig-Wag Strobe (side A)
- Port B - Tail/Brake (use 2-way cables)
- Port C - Slow Strobe (not used)
- Port D - Wig-Wag Strobe (side B)
- Port E - Headlights
- Port F - Slow Strobe (not used)
- Port G - Flasher Bar (optional)
*This configuration does support On/Off Control of a Flasher Bar, along with the strobes. Connect UF-7R's input 2 to the transmission channel on your receiver. You will have Tail/Brake function and Strobes in the Front Running Lights and Reverse. Tail/Brake will function normally.
**The Traxxas Ultimate RC Hauler Light Kit does not come with a Flasher Bar, that is sold separately. You can purchase that link here. Click picture to view Flasher Bar.
Traxxas Ultimate RC Hauler Light Kit Includes:
- 1 - UF-7R Light Controller
- 2 - 5mm Single White LEDs (700mm)
- 2 - 5mm Single Red LEDs (700mm)
- 1 - 5mm Dual White LEDs
- 2 - 3mm Single Orange LEDs
- 2 - 5mm Single Red LEDs
- 2 - 2-Way LED Splitters
- Zip Ties and Zip Tie Mounts for clean wiring management
- Attack Scale Bumper Stickers
- UF-7R Controller
- Full Running Lights
- Scale Reverse Function
- Multiple Modes
- Expandable
TRX4 Bronco Light Kit DG-1

Take your TRX4 Bronco to the next level with MyTrickRC's TRX4 Bronco Light Kit! This kit includes the well known Attack High Power Headlights, Front and Side Marker Lights, and Tail Lights. The kit is fully expandable, with the ability to add Rock Lights, Light Bars, and Spot Lights.
The TRX4 Bronco Light Kit has some great features including Easily Expandable add Rock Lights, Light Bars, and Spot Lights, Waterproof LEDs, Scale Lights, and more! This is great for power management. simple Plug and Play Installation, and it was built specifically to fit your truck. Also, we offer a detailed instruction video to make installation easy. The kit comes standard with our DG-1 Light Controller; a sleek, easy to setup, and simple to use light controller featuring 6 individual output ports 4 standard power and 2 High power. This port configuration gives you the ability to create various combinations of 3 and 5mm LEDs, Rock Lights, etc. in various colors!
Minor modifications to the body are required for installation.
This kit also works with the High Trail TRX4 Bronco!
Back in Stock!
TRX4 Bronco Light Kit Includes:
- DG-1 Controller
- 1pcs Attack High Power Headlights
- 1pcs 5mm Dual Red Tail Lights
- 1pcs 3mm Dual Front Turn Signal Marker Lights
- 1pc 3mm Quad Front and Rear Side Marker Lights
- 1pc 3D printed LED mounts
NOTE - for Traxxas Battery users
A Traxxas Battery Adapter (sku MYK-RTX) is required with this kit if you plan to use a Traxxas Battery on your vehicle.
OPTIONAL - Rock Light available are for this vehicle:
4-LED Rock Light Set
8-LED Rock Light Set
- High Power Headlights
- Side Marker Lights
- Tail Lights
- Reverse Lights
- DG-1 Controller
TRX4 Defender Kit with 5" Light Bar HB-2

Trick Out your Traxxas TRX-4 Land Rover Defender with a MyTrickRC Light Kit!
Our TRX4 Defender Light Kit HB-2 starts with a 5" Light Bar complemented by Attack High Power Headlights for Insane Brightness! To this add Front Running Lights and Tail Lights and you've got an awesome Scale vehicle!
This easy to install Kit features the HB-2 Lighting Controller. The TRX4 Defender HB-2 Kit with 5" Light Bar is fully Plug and Play so Installation is Easy and Fun.
Freedom to Expand
It's also Super Easy to add Rock Lights (SKU: MYK-TDR) to the TRX4 Defender HB-2 Kit with 5" Light Bar. Add Four or Eight Rock Lights, and take this truck to the Next Level of Insane Light Output. This is a Huge Benefit on the trail when you need lots of light for safe hiking. You can Really Light Up the Trail with some Rock Lights. MyTrickRC Rock Lights are Plug and Play with the TRX4 Defender HB-2 Kit with 5" Light Bar.
TRX4 Defender Light Kit HB-2 Features
- Scale Lighting System including 5" Light Bar, High Power Headlights, Rear Tail Lights, Front Running Lights
- Custom Headlight Reflectors provide a Scale look, and this system uses existing stock screws for simple mounting
- Sleek looking LED Headlights and Curved Light Bar
- 5" Attack Light Bar mounts to stock roll cage. Installation is super easy and does not require any cutting or mods to stock parts
- Lighting Harness with Circuit Board Light Clusters has minimal wiring so installation is quick and easy
- Expandable System - Adding High Power Spot Lights or Rock Lights is Plug-and-Play
- HB-2 Lighting Controller is High Quality Scale Lighting
- Ultra Bright LEDs, MyTrickRC does not compromise on component quality
- Impact Resistant Light Bar Design can take a beating
TRX4 Defender Light Kit HB-2 Includes:
LIGHT BAR
- 1pc 5" Attack Light Bar with Mounts
BODY LIGHT SYSTEM
- 1pc Lighting Harness with
- 1 Pair of Headlight Clusters including High Power Headlights, White and Orange Running Lights
- 1 Pair of Tail Light Clusters including Tail Lights
- 1set Custom Headlight Reflectors and Retaining Brackets
- 1pc HB-2 Light Controller
- Zip Ties and Zip Tie Mounts for clean wiring management
- Attack Scale Bumper Stickers
NOTE - for Traxxas Battery users
A Traxxas Power Adapter (sku MYK-RTX) is required with this kit if you plan to use a Traxxas Battery on your vehicle.
OPTIONAL - Rock Light Sets available are for this vehicle:
4-LED Rock Light Set
8-LED Rock Light Set
- Ultra Bright
- 5" Light Bar
- Scale Headlights
- Scale Tail Lights
- HB-2 Controller
TRX4 Defender UF-7 Light Kit

With the TRX4 Defender UF-7 Light Kit you can quickly and easily add a Scale Light System to your Traxxas Defender. This sweet system has Dual LED Headlights, Front Markers, Turn Signals, Tail/Brake, and Reverse! And with the custom designed 3D Printed Headlight and Tail Light Holders, and Plug and Play electronics, installation is a snap. This is the absolute best system on the Market for those who want Scale Lighting on their Defender, and that you can count on to work as claimed. With thousands of these systems in the market, you can buy with confidence knowing you will be in the company of many others who love MyTrickRC Lighting Systems.
Some of the great features you will get with the TRX4 Defender UF-7 Light Kit are
- Scale Lighting System including Headlights, Tail/Brake Lights, Reverse Lights, and Turn Signals (Turn Signals can easily be Configured as Running Lights if Preferred)
- Scale Light Buckets match the Stock Light Clusters, and use Existing Stock Hardware for Mounting
- Sleek looking Dual LED Headlights
- Rock Solid UF-7 Lighting Controller is a is an Industry Leader for Scale Lighting
- Ultra Bright LEDs, MyTrickRC does not compromise on component quality
- Defender Kit uses standard 3mm LEDs that are are water tolerant, and easily serviceable
- Impact Resistant Plastic Design and Construction
TRX4 Defender UF-7 Light Kit Includes:
- 1 Set 3D Printed Headlight Buckets with LED Retaining Brackets
- 1 Set 3D Printed Tail Light Buckets with LED Retaining Brackets
- UF-7 Multi Function Lighting Controller
- 4pcs 3mm Dual White LEDs (8LEDs for Headlights, and Reverse Lights)
- 1pc 3mm Dual Red LEDs (2LEDs for Tail/Brake Lights)
- 1pc 3mm Single Orange LEDs (4LEDs for Turn Signals/Running Lights)
- Zip Ties and Zip Tie Mounts for clean wiring managment
- Attack Scale Bumper Stickers
NOTES
- 6" Light Bar Sold Separately
- 3D Printed Headlight
- Tail Light Buckets
- Scale Brake and Reverse
- Optional Turn Signals
- UF-7 Lighting Controller
UF-7 Short Course Truck Light Kit

UF-7 Short Course Truck Light Kit
The UF-7 Short Course Truck Light Kit was one of the first Lighting Kits MyTrickRC ever made.
This Rock Solid System has stood the test of time. Many customers tell us this system has outlived their vehicles, only to end up lighting their next vehicles. That shows the value your get with MyTrickRC and the UF-7 Short Course Truck Light Kit.
Quality, Flexibility, and Simplicity are the building blocks the UF-7 System is built on. This system can be easily added onto, or changed up. Just connect the desired LEDs and select the desired MODE, plug and play!
The UF-7 has 10+ MODE options. Some MODEs are for TRUCKS, other for CARS, AIRPLANES, BOATS, PROP Lighting, and EMERGENCY VEHICLES. The blink patterns of these MODEs create Scale Realism
Includes:
- 2pcs 5mm Dual WHITE Headlights
- 2pcs 3mm Dual WHITE Driving Lights
- 1pcs 3mm Dual RED Tail-Brake Lights
- UF-7 Universal Light Controller
- Power Cables to power off your car’s battery, or 9V battery
- Mounting Hardware
- Built for Bashers
- UF-7 Controller
- 5mm Headlights
- 3mm Driving Lights
- Functioning Tail/Brake
UF-7C Controller

UF-7C Controller
MyTrickRC's UF-7C Controller was born out of its earlier cousin, our original UF-7 Controller. The success of the UF-7 Controller literally created MyTrickRC! The original UF-7's Rock Solid Electronics and Software, together with it's Plug & Play Design, and Simple Operation made it the obvious choice for RC Enthusiasts across the RC Hobby. We used it exclusively in our Original Light Kits. The Electronics in the original UF-7 were Tough and Reliable both by design and we don't cut corners on materials or components.
After many years of excellent success with the UF-7, we discovered that with a few simple tweaks, we could make it even better and greatly enhance its Overall Performance and Value. The UF-7C Controller uses the exact same Rock Solid Electronics as the original UF-7, but with four small, but powerful, upgrades. First we changed the MODE Button to be Waterproof, making the UF-7C Fully Controller Waterproof! Then we also upgraded all the connectors on the UF-7C Controller to be Gold Plated, further enhancing their long term contact performance, particularly around water! But we didn't stop there, we also upgraded the PigTail Output to support up to 2 Amps of Current! This means the UF-7C can Power Light Bars, Rock Lights, Halos, or MyTrickRC High Power Lights, and even certain Light Bars from Other Brands**! Yes, that's right, if you already have a Proline, or Any Light Bar that powers off the Receiver, you can power it from the UF-7C! Not only does this reduce the amount of wires to fuss with, the UF-7C Controller has a Plug & Play option that adds Remote On/Off Control of all your LEDs, including the Light Bar!
On the Software side of the UF-7C Controller, we made equally huge improvements! We figured out a completely new way to re-write the UF-7C Controller programming code, unleashing the full potential of the UF-7C Controller's Micro-Processor and onboard Memory to greatly expand the LED Blink Functions in EVERY MODE. So all the MODEs on the UF-7C got more blink features added to them. Some examples of features we added are*: Off Road MODEs with Optional Remote On/Off Control, Center Brake Light, Backfire, Automatic Hazard Lights, additional Emergency Strobes, Scale Warbird with Switchable Wig-Wag Landing Lights and so much more!
The UF-7C Controller includes:
- 1pc UF-7C Controller
- 1pc Servo Y-Cable
- 1pc 9V Battery Adapter
- Mounting Hardware
NOTES
- The Power Ratings for the UF-7C Controller are: 4.5-12VDC, 2 Amps MAX.
- UF-7C Controller's Pigtail Output passes Receiver Power straight through it. Therefore the voltage on the Pigtail Output will be the same as your Receiver. CAUTION - Do Not draw more power off your receiver than it's rated for.
- UF-7C Controller's Port E (Headlights Port) can be used to power Headlights and/or Running Lights. Port E stays ON STEADY in all Land Vehicle MODEs.
- Each port on the UF-7C Controller can power LOTs of LEDs, but the more LEDs you add to one port, the dimmer all of them will become. We recommend trying not to exceed 4 LEDs per UF-7C Controller LED Output.
- A Higher Input Voltage on the UF-7C will make all of your LEDs slightly Brighter, However it's better for the Controller if you don't exceed 9VDC.
- MyTrickRC sells LED Splitter Cables which allow you to add more LEDs to a port. However, you can't mix all LED colors together on one LED Splitter. Please see our NOTEs about this on the individual LED Splitter Product Pages. You can find LED Splitters here: https://mytrickrc.myshopify.com/collections/cables
* The NEW Blink features we mentioned are only in certain MODEs
** The UF-7C Controller Can Power:
- 1pc Attack 5" or 6" Light Bar, or Light Bar from Other Manufacturer
OR 1 pair of
- Attack 17mm Round Wafer Headlights
- Attack 19mm Rectangular Wafer Headlights
- Attack Halo Headlights
- NEW Attack 7-LED Wafer Strip Light
OR
- 4 pairs of Attack Spot Lights, original Attack Headlights, Attack Rock Lights, or Attack 9mm Wafer Lights
User Guide
- Lights High Power LEDs
- Aircraft Modes
- Automatic Hazard Lights
- Blink Patterns
- Waterproof
UF-7R Controller

UF-7R Lighting Controller
The UF-7R Lighting Controller is the newest step in the progression of our UF-7 LED Light Controller - the Lighting Controller that help create MyTrickRC!
The original UF-7's rock solid electronics and software, together with its Plug & Play design, and simple operation made it the obvious choice for RC enthusiasts across the RC hobby. We used it exclusively in our original Light Kits. The electronics in the original UF-7 were tough and reliable both by design and we didn't and still don't cut corners on materials or components.
After many years of success with the UF-7, we discovered that with a few simple tweaks, we could make it even better - greatly enhancing it's overall performance and value!
The UF-7R Controller uses the exact same rock solid electronics as the original UF-7, but with four small, but powerful, upgrades:
First, we changed the MODE Button to be Waterproof, making the UF-7R Fully Waterproof!
Then, we also upgraded all the connectors on the UF-7R Lighting Controller to be gold plated, further enhancing their long term contact performance, particularly around water!
But we didn't stop there, we also upgraded the Pigtail output to support up to 2 Amps of current! This means the UF-7R can power Light Bars, Rock Lights, Halos, or MyTrickRC High Power Lights, and even certain Light Bars from Other Brands**! Yes, that's right, if you already have a Pro-Line, or any light bar that powers off the Receiver, you can power it from the UF-7R! Not only does this reduce the amount of wires to fuss with, the UF-7R Controller has a Plug & Play option that adds Remote On/Off Control of all your LEDs, including the Light Bar!
On the Firmware side of the UF-7R Lighting Controller, we made equally huge improvements. We figured out a completely new way to re-write the UF-7R Controller programming code, unleashing the full potential of the UF-7R Controller's microcontroller and onboard memory to greatly expand the LED blink functions in EVERY MODE. So all the MODEs on the UF-7R got more blink features added to them. Some examples of features we added are*: Off Road MODEs with Optional Remote On/Off Control, Center Brake Light, Backfire, Automatic Hazard Lights, additional Emergency Strobes, Scale Warbird with Switchable Wig-Wag Landing Lights and so much more!
What's Included
- 1pc UF-7R Controller
- 1pc UF-7 Servo Y-Cable
- 1pc UF-7 9V Battery Adapter
- Mounting Hardware
Specifications
Power Input: 4.5-12VDC, 2A MAX
NOTES
- UF-7C Controller's Pigtail Output passes Receiver Power straight through it. Therefore the voltage on the Pigtail Output will be the same as your Receiver. CAUTION - Do Not draw more power than your Receiver's rating.
- UF-7R Controller's Port E (Headlights Port) can be used to power Headlights and/or Running Lights. Port E stays ON STEADY in all Land Vehicle MODEs.
- Each port on the UF-7R Controller can power LOTs of LEDs, but the more LEDs you add to one port, the dimmer all of them will become because they must share the power. We recommend trying not to exceed 4 LEDs per UF-7R Controller LED Output.
- A Higher Input Voltage on the UF-7R will make all of your LEDs slightly Brighter, However it's better for the Controller if you don't exceed 9VDC.
- MyTrickRC offers LED Splitter Cables which allow you to add more LEDs to a Port. However, you can't mix all LED colors together on one LED Splitter. Please see our NOTEs about this on the individual LED Splitter Product Pages. You can find LED Splitters here: https://mytrickrc.myshopify.com/collections/cables
* The NEW Blink features we mentioned are only in certain MODEs
** The UF-7R Controller Can Power:
- 1pc Attack 5" or 6" Light Bar, or Light Bar from Other Manufacturer
OR 1 pair of
- Attack 17mm Round Wafer Headlights
- Attack 19mm Rectangular Wafer Headlights
- Attack Halo Headlights
- NEW Attack 7-LED Wafer Strip Light
OR
- 4 pairs of Attack Spot Lights, original Attack Headlights, Attack Rock Lights, or Attack 9mm Wafer Lights
User Guide
- Lights High Power LEDs
- Staged Turn On Lighting
- Automatic Hazard Lights
- Blink Patterns
- Waterproof
UF-7R Off Road Rock Crawler Light Kit

The UF-7R Off Road Rock Crawler Light Kit is MyTrickRC's first Rock Crawler Kit, and is still a very popular Kit! The Rock Solid and Well Proven UF-7R Controller is at the heart of the system. The UF-7R offers functioning Brake Lights, optional Reverse Lights, Full Brightness Headlights, Driving Lights, and Running Lights.
The UF-7R Off Road Rock Crawler Light Kit is also easy to change-up. Simply switch out the LEDs and select the desired MODE - truly Plug and Play! No other system offers the value of MyTrickRC Lighting Systems, as these are built to last and perform as claimed. The UF-7R was designed with Quality, Durability, and Simplicity in mind.
UF-7R Off Road Rock Crawler Light Kit Includes:
- 1pc 5mm Dual WHITE Headlights
- 3pcs 3mm Dual WHITE Driving Lights
- 1pc 3mm Dual ORANGE Front Marker Lights
- 1pc 3mm Dual RED Tail-Brake Lights
- UF-7R Universal Light Controller
- Power Cables to power either off your vehicle's Battery or a 9V Battery
- Mounting Hardware
*RPM Light Bar Canisters not included.
- Headlights
- Driving Lights
- Dual Orange Markers
- Tail/Brake Lights
- UF-7R Controller
Utility Body Light Kit

Utility Body Light Kit
If you're building a Scale Utility Vehicle then MyTrickRC's Utility Body Light Kit will help you make it Great! The Utility Body Light Kit is based around the well proven UF-7 Lighting Controller, and together with our Super Bright LEDs and Ultra-Scale Emergency Vehicle Blink MODEs, the Scale Realism takes your Utility Vehicle to the Next Level! With functioning Headlights, Tail/Brake Lights, and available Remote ON/OFF Control of the Strobes (additional Y-Cable for needed, sold separately), no other kit on the planet comes close to MyTrickRC’s Utility Body Light Kit. Oh, and this kit is Plug and Play, so Installation is Easier and Faster than Ever! MyTrickRC helps you get Great Results by offering Clear Instructions, Dependable Products, and Helpful Install Videos. Join the Thousands of other Happy MyTrickRC Customers, and see How Awesome your Utility Vehicle come out!
Utility Body Light Kit Includes:
- 1pc 5mm Dual WHITE Headlights
- 1pc 3mm Dual RED Tail-Brake Lights
- 2pc 3mm Single RED Body Strobes
- 2pc 3mm Single ORANGE Body Strobes
- UF-7R Light Controller
- Power Cables for Receiver, or 9V battery
- Mounting Hardware
- 2 Headlights
- 2 Tail/Brake Lights
- 2 Red Strobes
- 2 Orange Strobes
- Power: 9V or Receiver
**Roof Flasher Bar sold separately, not included in this kit.
Utility Deluxe Light Kit


Utility Deluxe Light Kit
The Utility Deluxe Light Kit is the perfect kit for those wanting to build a Super Scale Tow Truck, Pace Car, or other Utility Vehicle.
The Utility Deluxe Light Kit includes Headlights, Front Orange Strobes, Tail/Brake Lights, and Rear Strobes on the body. On the Roof is MyTrickRC's Multi-MODE Utility Flasher. With More Super Bright LEDs and More Blink Pattern Options, the Roof Flasher takes it to the Next Level. The Light Bar looks Super Scale, ON or OFF. The Utility Deluxe Light Kit uses the UF-7R Controller at it's heart, and includes Remote ON/OFF Switching of all Strobes and Roof Flasher! This Kit also features Functioning Tail/Brake Lights. This System is fully Plug and Play, so Installation is Easier than Ever!
And, the Utility Deluxe Light Kit uses MyTrickRC's Super Bright LEDs, and is so Brightly Lit that everyone who see's it cant help but notice it. MyTrickRC's focus on Quality, Dependability, Simplicity, and Cool Features shows with Utility Deluxe Light Kit. Join the thousands of other Happy MyTrickRC Customers, and see how awesome your Emergency Vehicle Lighting can be.
Utility Deluxe Light Kit Includes:
- 1pc 5mm Dual WHITE Headlights
- 1pc 3mm Dual RED Tail-Brake Lights
- 2pc 3mm Single RED Body Strobes
- 1pc 3mm Single ORANGE Body Strobes
- 1pc UF-7R Universal Light Controller
- Power Cables for Receiver, or 9V battery
- Mounting Hardware
Also Includes Overhaul Utility Flasher Bar
- 1/10 Super Scale Multi-Mode Flasher Bar
- Power Cables to power off the UF-7 controller, or 9V battery
- Mounting Hardware
- Utility Body Kit
- Roof Flasher Bar
- Scale Sticker Set
- Remote Strobe Control
- UF-7R Controller
Vanquish Optic Light Kit

Vanquish Optic Light Kit
MyTrickRC's Vanquish Optic Light Kit is the perfect complement to your Vanquish H10 Optic trail buggy. This Kit features a sleek and rugged, light weight Custom Headlight Assembly with integrated High Intensity Headlights along with our new Scale Tail Light Bar. The Vanquish Optic Light Kit also comes with two pairs of Attack Rock Light Pods and the compact HB-2 Lighting Controller. It powers off your vehicle's battery balance port - 2S and 3S balance port adapters included. You can also power this kit directly off your vehicle's receiver with our optional Adapter Cable: https://mytrickrc.com/collections/cables/products/hb-2receiverpowercable
For that ultimate in scale look, add an optional TrickWhip Light in the color of your choice. Shown above we see the Optic rocking a red TrickWhip.
Features
- Simple, hassle-free operation
- Easy Assembly and Installation
- Manual On/Off Light Control
- In-Line Quick Disconnect to Battery
What's Included
- Pre-assembled Custom Scale Headlight Module with Built-In:
- High Brightness Quad-LED Headlights
- Protective Polycarbonate Clear Lenses
- New Pre-assembled Custom Scale Tail Light Bar with Built-In:
- Two 27mm Red LED Strip Lights
- Red Lenses
- 2-Pair Attack Spot Lights for Rock Lights
- 1-HB-2 Lighting Controller
- 2-Way LED Splitter
- Mounting Screws and Zip Ties
Installing your Light Kit
Before we can do anything, first we must remove the roof panel.

Zip tie the Tail Light Bar to the roll cage and run its wires across and down the B pillar as shown.

If you purchased an optional TrickWhip Light, screw it to the cage with a P-clip and feed its wire down as shown.

Zip tie the Rock Lights to the lower cage facing the rear wheels like this.

Next, remove the Hood Panel.

Zip tie the front Rock Lights to the frame and feed their wire down as shown.

Now unscrew the Grill from underneath.

Place our Custom Headlight Assembly into the Headlight Grill like so.

Being careful not to pinch any wires, re-attach the Headlight Grill, Hood, and Roof. Feed wires to the passenger side battery pocket side Panel.
Connect the lights to the HB-2 Lighting Controller.
NOTE - Run all LED wires to passenger side of vehicle. - Use 2-Way LED Splitter for Rock Lights, leaving one port on the HB-2 for other high power accessories, such as a future Light Bar, for example. Or you can add a TrickWhip Light by plugging it through a 5V to 3V Regulator.

- Scale Headlights
- Scale Tail Light Bar
- 2pair Rock Light Pods
- Super Bright, Plug & Play
- HB-2 Controller
Vanquish VS4-10 and Phoenix Light Kit HB-2

Vanquish VS4-10 and Phoenix Light Kit
Want a serious Light Kit for your Vanquish VS4-10 or Phoenix? Look no further than MyTrickRC's Vanquish VS4-10 and Phoenix Light Kit.
The Vanquish VS4-10 and Phoenix Light Kit includes High Power Attack Headlights, Rock Lights, and Tail lights. Additionally, the Vanquish VS4-10 and Phoenix Light Kit is Expandable, so if you want to add more Rock Lights, Running Lights, Interior Lights, or a Light Bar you easily can.
This Kit works equally well with the original VS4-10 and Phoenix Limited, and the Pro.
Vanquish VS4-10 and Phoenix Light Kit Features
- High Brightness Headlights
- Four Rock Light Pods
- Red Tail Lights
- Waterproof LEDs
- Easy Installation
- In-Line Quick Disconnects between Body and Chassis
What's Included
- 1 pair High Power Attack Headlights
- 2 pairs Attack Spot Lights for Rock Lights
- 1 pc Dual 5mm Red Tail Lights
- Scale Headlight Bezels
- HB-2 Lighting Controller
- Zip Ties and Zip Tie Mounts for clean wiring management
- MyTrickRC Stickers
Rock Light Installation Photos
Front Rock Lights
Rear Rock Lights
- Attack Headlights
- Scale Headlight Mounts
- Rock Lights
- Tail Lights
- HB-2 Controller