Traxxas Ultimate RC Hauler

MyTrickRC's Traxxas Ultimate RC Hauler Kit is the perfect light kit upgrade for your Ultimate RC Hauler Tow Truck.   

This incredible kit uses MyTrickRC's new UF-7R Controller.  One of the coolest aspects of the Traxxas Ultimate RC Hauler Kit is the UF-7R's flexibility, allowing you to configure your light system different ways depending on how you want it!   

By slightly changing the way LEDs are connected, and selecting a different MODE, you can easily configure, or change up your settings.  Everything you need for all configurations is included in the kit.  

SETUP #1 - Functioning Turn Signals

If you want a scale setup with functioning Turn Signals the Traxxas Ultimate RC Hauler Kit can do that. Set the UF-7R to MODE 7 and connect LEDs as shown:

• Port A - Reverse
• Port B - Left Rear Tail/Brake/Turn (use 2-way cables)
• Port C - Right Rear Tail/Brake/Turn
• Port D - Front Right Turn
• Port E - Headlights
• Port F - Front Left Turn

*This configuration doesn't support On/Off Control of Flasher Bar. MyTrickRC has solution for this coming soon.

SETUP #2 - Staged Lighting Control

Or, if you prefer a setup for Rock Crawling that has Scale Brakes and Reverse, and the ability to power a Flasher Bar then you want setup #2. By connecting UF-7R's Input 2 to the transmission servo, you can use the transmission switch to toggle through staged lighting. Staged lighting starts with all Lights OFF. the first toggle turns on front running lights, Tail/Brake, and Reverse. The next level adds Headlights, and the last level turns our port G which you can use to power a Flasher Bar, and/or High Power LEDs like Rock Lights, or Utility Lights.  Set the UF-7R to MODE 3 and connect LEDs as shown: 

• Port A - Reverse
• Port B - Blinking (not used)
• Port C - Tail/Brake
• Port D - Front Running Lights
• Port E - Headlights
• Port F - Center Bake (not used)
• Port G - High Power Output (not used)

SETUP #3 - Remotely Controlled Strobes

For Emergency Use Setup with wig-way strobes, set the UF-7R to MODE 10 and connect LEDs as shown: 

• Port A - Wig-Wag Strobe (side A)
• Port B - Tail/Brake (use 2-way cables)
• Port C - Slow Strobe (not used)
• Port D - Wig-Wag Strobe (side B)
• Port E - Headlights
• Port F - Slow Strobe (not used)
• Port G - Flasher Bar (optional)

*This configuration does support On/Off Control of a Flasher Bar, along with the strobes.  Connect UF-7R's input 2 to the transmission channel on your receiver.  You will have Tail/Brake function and Strobes in the Front Running Lights and Reverse.  Tail/Brake will function normally.

**The Traxxas Ultimate RC Hauler Light Kit does not come with a Flasher Bar, that is sold separately.  You can purchase that link here.  Click picture to view Flasher Bar.

Traxxas Ultimate RC Hauler Light Kit Includes:

• 1 - UF-7R Light Controller
• 2 - 5mm Single White LEDs (700mm)
• 2 - 5mm Single Red LEDs (700mm)
• 1 - 5mm Dual White LEDs
• 2 - 3mm Single Orange LEDs
• 2 - 5mm Single Red LEDs
• 2 - 2-Way LED Splitters
• Zip Ties and Zip Tie Mounts for clean wiring management
• Attack Scale Bumper Stickers

• UF-7R Controller
• Full Running Lights
• Scale Reverse Function
• Multiple Modes
• Expandable