ProLine Comp Wagon Light Kit

MyTrickRC's Pro-Line Comp Wagon Light Kit is the perfect compliment to your competition rig. This Kit features a sleek and rugged, light weight Grill with integrated High Intensity Headlights. The Pro-Line Comp Wagon Light Kit also comes with two pairs of Attack Rock Light Pods and the compact HB-2 Lighting Controller. The Pro-Line Comp Wagon Light Kit powers off your vehicle's Receiver and is Plug and Play.

Features

• Simple, hassle-free operation
• Easy Assembly and Installation
• In-Line Quick Disconnects between Body and Chassis

Kit Includes

• Custom Scale Grill with Built-In:
• 1-Pair 27mm LED Strip Lights
• 1-Pair Clear Lenses
• 2-Pair Attack Spot Lights for Rock Lights
• 1-HB-2 Lighting Controller
• Mounting Screws and Zip Ties

Scale Grill Installation

Step one is to cut an opening in your body for the Grill to slip into. The Grill has a slot on the top and sides for the body to slide into.

Note: Cut right on the edge of where the body dips down into the Grill area. Use the Grill as a template and Be Careful not to cut away too much! The Grill is slotted so that it can slide into the cut body. Before cutting, use the Grill as a guide to confirm where to cut.

You can now slide your assembled Grill/light setup into your vehicle body.

We recommend securing it with a silicone-based adhesive such as Zap Goo, E-6000, Shoe Goo or equivalent.

• Scale Grill with
• Super Bright Strip Lights
• 2pair Rock Light Pods
• HB-2 Controller
• Plug and Play

ProLine Power Wagon Light Kit

MyTrickRC's Pro-Line Power Wagon Light Kit is the perfect compliment to your competition rig. This Kit features a sleek and rugged, light weight Grill with integrated High Intensity Headlights. The Pro-Line Power Wagon Light Kit also comes with two pairs of Attack Rock Light Pods and the compact HB-2 Lighting Controller. The Pro-Line Power Wagon Light Kit powers off your vehicle's Receiver and is Plug and Play.

Features:

• Simple, hassle-free operation
• Easy Assembly and Installation
• In-Line Quick Disconnects between Body and Chassis

Kit Includes:

• Custom Scale Grill with Built-In:
• 1-Pair 27mm LED Strip Lights
• 1-Pair Clear Lenses
• 2-Pair Attack Spot Lights for Rock Lights
• 1-HB-2 Lighting Controller
• Mounting Screws and Zip Ties

Scale Grill Installation

Step one is to cut an opening in your body for the Grill to slip into. The Grill has a slot on the top and sides for the body to slide into.

Note: Cut right on the edge of where the body dips down into the Grill area. Use the Grill as a template and Be Careful not to cut away too much! The Grill is slotted so that it can slide into the cut body. Before cutting, use the Grill as a guide to confirm where to cut.

You can now slide your assembled Grill/light setup into your vehicle body. We recommend securing it with a silicone-based adhesive such as Zap Goo, E-6000, Shoe Goo or equivalent.

• Scale Grill with
• Super Bright Strip Lights
• 2pair Rock Light Pods
• HB-2 Controller
• Plug and Play

Losi Promoto Motorcycle Light Kit

Amp up your Promoto Motorcycle with MyTrickRC's Losi Promoto Motorcycle Light Kit! The Losi Promoto Motorcycle Light Kit is a sleek and simple Light Kit that's a snap to install and has Nice Bright Light Pods in front and a Sleek Tail Light Pod tucked up inside the rear fender. The mounting locations of the LEDs on the Losi Promoto Motorcycle Light Kit were chosen to protect them from impacts. The locations are away from the bikes normal high impact, wear areas.  Additionally, the LEDs on the Losi Promoto Motorcycle Light Kit meet MyTrickRCs standard for Crazy Brightness, even in broad daylight.

NOTES:

This Kit powers directly off the Receiver.

The Tail Light includes an strong Adhesive Pad for installation, however, if you want added security in the adhesion to the rear fender, also adding some Zap Goo, Shoe Goo, or E-6000 around a couple edges works very well for these parts. These adhesives bond to both parts well.

**Be sure the rear fender is very clean before applying the Tail Light Pod. Clean the Promoto's rear fender with isopropyl alcohol (rubbing alcohol). Clean surface twice, allow the alcohol dry fully, then install Tail Light Pod by pressing the adhesive pad on the Tail Light Pod firmly in place. It takes about 24hrs for the adhesive pad to fully bond to both parts. Use the bike gently during these 24hrs after installing the tail light pod.

Features:

• Simple, hassle-free operation
• EasyAssembly and Installation
• Custom made kit compliments the Promoto's rad styling
• LEDs are very Bright and Functional Day and Night
• Powers On/Off with the Bike

Kit Includes:

• 1-Pair SP4 High Brightness Light Pods
• 1-Tail Light Pod
• 1-PAL3 Power Supply

Installation:

Remove Left Side Panel.

Connect the Light Pod to the Power Supply and place as shown. Connect the Light Pods to either black connector on the Power Supply.  You can use double back tape, Zap Goo, Shoe Goo, or E-6000 to bond the Power Supply to the bike.

Next feed Tail Light wire though the small hole in the metal plate on the side of the bike, as shown. Connect the Tail Light to the white port on the Power Supply.

Light Kit is now installed. Re-Install Motor Cover and Left Side Panel, you are DONE!

• Super Bright SP4 Pods
• Tail Light Pod
• PAL3 Power Supply
• Simple Install
• Expandable

MyTrickRC's Arrma Felony LED Light Kit takes your, already badass car to the next level!

Using MyTrickRC's super versatile Wafer LEDs combined with our powerful UF-7R controller, the Arrma Felony Kit completes the wicked attitude of the Arrma Felony.

So what makes the Arrma Felony Kit so incredible?  Start with the sleek design of the Carbon Nylon custom 3D Printed Headlight and Tail Lights that match the bodies geometry.  These MyTrickRC designed parts perfectly compliment the Rebel styling of the Arrma Felony.    And with our powerful new UF-7R Controller you get functioning Tail/Brake Lights, Reverse and Backfire!  MyTrickRC's Arrma Felony Kit is an insane kit for an insane car.  

One of the great aspects of the Arrma Felony Kit is how easy it is to expand your light system.  Want to add Underglow?  It's a snap with the Arrma Felony Kit.  Simply glue LEDs in place, and connect to the controller.  

Arrma Felony Kit Includes:

• 1 - UF-7R Light Controller
• 1 - 27mm White Linear Wafer LEDs with Lenses
• 1 - 9mm White Square Wafer LEDs with Lenses
• 2 - 27mm Red Linear Wafer LEDs
• 1 - 3mm Dual Orange LEDs with Conical Lens
• 1 - 3mm Dual White LEDs for Reverse
• 1 - 3mm Dual Yellow LEDs for Backfire
• 3D printed buckets 
• Zip Ties and Zip Tie Mounts for clean wiring management
• MyTrickRC Scale Bumper Stickers

• UF-7R Controller
• Tail/Brake LEDs
• Reverse Lights
  
• Backfire
  
• Expandable

MyTrickRC's Traxxas Ultimate RC Hauler Kit is the perfect light kit upgrade for your Ultimate RC Hauler Tow Truck.   

This incredible kit uses MyTrickRC's new UF-7R Controller.  One of the coolest aspects of the Traxxas Ultimate RC Hauler Kit is the UF-7R's flexibility, allowing you to configure your light system different ways depending on how you want it!   

By slightly changing the way LEDs are connected, and selecting a different MODE, you can easily configure, or change up your settings.  Everything you need for all configurations is included in the kit.  

SETUP #1 - Functioning Turn Signals

If you want a scale setup with functioning Turn Signals the Traxxas Ultimate RC Hauler Kit can do that. Set the UF-7R to MODE 7 and connect LEDs as shown:

• Port A - Reverse
• Port B - Left Rear Tail/Brake/Turn (use 2-way cables)
• Port C - Right Rear Tail/Brake/Turn
• Port D - Front Right Turn
• Port E - Headlights
• Port F - Front Left Turn

*This configuration doesn't support On/Off Control of Flasher Bar. MyTrickRC has solution for this coming soon.

SETUP #2 - Staged Lighting Control

Or, if you prefer a setup for Rock Crawling that has Scale Brakes and Reverse, and the ability to power a Flasher Bar then you want setup #2. By connecting UF-7R's Input 2 to the transmission servo, you can use the transmission switch to toggle through staged lighting. Staged lighting starts with all Lights OFF. the first toggle turns on front running lights, Tail/Brake, and Reverse. The next level adds Headlights, and the last level turns our port G which you can use to power a Flasher Bar, and/or High Power LEDs like Rock Lights, or Utility Lights.  Set the UF-7R to MODE 3 and connect LEDs as shown: 

• Port A - Reverse
• Port B - Blinking (not used)
• Port C - Tail/Brake
• Port D - Front Running Lights
• Port E - Headlights
• Port F - Center Bake (not used)
• Port G - High Power Output (not used)

SETUP #3 - Remotely Controlled Strobes

For Emergency Use Setup with wig-way strobes, set the UF-7R to MODE 10 and connect LEDs as shown: 

• Port A - Wig-Wag Strobe (side A)
• Port B - Tail/Brake (use 2-way cables)
• Port C - Slow Strobe (not used)
• Port D - Wig-Wag Strobe (side B)
• Port E - Headlights
• Port F - Slow Strobe (not used)
• Port G - Flasher Bar (optional)

*This configuration does support On/Off Control of a Flasher Bar, along with the strobes.  Connect UF-7R's input 2 to the transmission channel on your receiver.  You will have Tail/Brake function and Strobes in the Front Running Lights and Reverse.  Tail/Brake will function normally.

**The Traxxas Ultimate RC Hauler Light Kit does not come with a Flasher Bar, that is sold separately.  You can purchase that link here.  Click picture to view Flasher Bar.

Traxxas Ultimate RC Hauler Light Kit Includes:

• 1 - UF-7R Light Controller
• 2 - 5mm Single White LEDs (700mm)
• 2 - 5mm Single Red LEDs (700mm)
• 1 - 5mm Dual White LEDs
• 2 - 3mm Single Orange LEDs
• 2 - 5mm Single Red LEDs
• 2 - 2-Way LED Splitters
• Zip Ties and Zip Tie Mounts for clean wiring management
• Attack Scale Bumper Stickers

• UF-7R Controller
• Full Running Lights
• Scale Reverse Function
• Multiple Modes
• Expandable

AB-1402 Drift Car Kit

Looking to take your drift car build to the next level!? The AB-1402 Drift Car Kit is for you!

The AB-1402 Drift Car Kit comes standard with 4 headlights, 4 tail/brake, reverse, 2 backfire lights, and you also get hazard lights!

Our SQ-1 Light Controller. An easy to use, plug-n-play controller that taps into your vehicle’s receiver for power and throttle signal. The SQ-1 was developed with direct input and testing by leaders in the drift community. The SQ-1's Backfire function went through months of testing and refinement to get the final scale effect we were looking for.  

Installation is super simple, and the system is easily expandable. Adding more LEDs & functions like Brake, Reverse, Running Lights, Hazard, Etc., is easy. Just plug them in and go!

Some other great features are the SQ-1's compact size, minimizing weight and area needed for installation. Also, the AB-1402 Drift Car Kit is 100% waterproof! So, if you ever want to Drift or Bash in the Rain it's no problem. The SQ-1 also comes with a Quick Disconnect cable so it's a snap to remove and re-attach the body from chassis.

AB-1402 Drift Car Kit Includes:

• 1pcs SQ-1 Lighting Controller
• 2pcs 5mm Dual White Headlight LEDs
• 2pcs 5mm Dual RED Tail/Brake LEDs
• 1pcs 5mm Dual AMBER Running Light LEDs
• 1pcs 3mm Dual ORANGE Backfire LEDs
• Quick Disconnect Power Cable (easy to remove body)
• Mounting Hardware

• SQ-1 Controller
• Deluxe Drift Kit
• 4pc Head & Tail Lights
• 2pc Scale Backfire
• Auto-Hazard Lights

Element RC Ecto Light Kit 

The perfect complement to your Element RC Ecto, is the ability to go anywhere at anytime; day or night!

The Element RC Ecto Light Kit is a Hight Power Light Kit based on the HB-2 LED Light Controller. The Element RC Ecto Light Kit pumps out TONs of Light, so all of your friends who don't have this kit will be envious of the Scale Look and amazing performance! 

The Element RC Ecto Light Kit is plug & play, making installation simple and hassle free!

The Ecto Light kit also come with cleans lenses and a couple FREE Ecto 3D Grill/Light Bucket files to print and add the extra POP, to your build.

Features:

• Simple, hassle-free operation
  
• Easy Installation 
• In-Line Quick Disconnects between Body and Chassis

Kit Includes:

• 1-HB-2 LED Light Controller
• 1-Dual Red 5mm
• 1-27mm Strip LED
• 1-Clean lenses
• 3D Print files (Online)

3D Grill Installation

Start be cutting away the grill section of your Element RC Ecto body.

Note: Cut right on the edge of where the body dips down into the grill area. Be careful not to cutaway too much!

Next you will take your 3D printed grill and insert the 27mm strip LEDs from the rear. 

NOTE: Take your time and insert the LED's with care. 

Once installed from the rear of the grill, you can cover the LED strips with the included clean lenses. 

NOTE: Insert lenses with care being sure to note any flash or fitment issues with the 3D print. The lenses should fit snug, NOT TIGHT. 

You can now slide your assembled grill/light setup into the Ecto body. We recommend a silicone-based adhesive such as ZapGoo, e6000, ShoeGoo or equivalent. 

Rear LED Installation: 

To install the tail lights on your Ecto, you will need to first make some holes in the body where you would like to locate your LEDs. 

Note: Be sure not to make your holes too big, the LED holder will not work correctly. 

After you make your holes, insert the included LED holders into the body from the outside.

Once the holders are installed, you install the LED's from the inside of the body. 

Once installed, we again recommend a small amount of silicone-based adhesive on the back of the LED's to help hold them securely in place. 

3D Print Your Own Grill!

• The Element RC Ecto Light Kit  was designed to work with some of the downloadable 3d grill files below.  
• Be sure to print your grill in a material that can handle the heat the LEDs will generate. We recommend ABS or Carbon Nylon.   PLA/PLA+ prints will likely not handle the heat and will deform. 

Click the grill image to download the files

NOTE - Dimension of 3D Prints varies with different printers.  If clear lenses are too tight to fit properly, try scaling up or modifying the STL file.

• HB-2 Controller
• Grill Included
• Super Bright
• Tail Lights
• Expandable

The Axial Capra Light Kit is the perfect compliment to your Axial Capra!

The MyTrickRC Axial Capra Light Kit is nice and compact, and offers some great features including High Power Headlights and Rock Lights. No Lighting controller needed on this one, its all powered off our Standard Light Bar Power Regulator, drawing power directly from the receiver!

It's Plug and Play and the Lights will be ON whenever the truck is On. With the Axial Capra Light Kit you can keep the stock Light Bar untouched, retaining the sleek look of the stock truck.

Features:

• Hi Performance / Low Cost
• Easy Installation
• Minimal Wiring
• Plug and Play

Includes:

• MyTrickRC Light Bar Regulator
• 1 Pair High Power Headlights
• 2 Pair High Power Rock Lights
• 1pc 3-Way LED Splitter
• Zip Ties and Zip Tie Mounts for clean wiring management
• Attack Scale Bumper Stickers

The Standard Light Bar Regulator is NOT for use with 3mm and 5mm LEDs, it will burn them up immediately! Do not connect more lights than your Receiver and ESC are rated for. Input 4.5-9VDC DO NOT Exceed 9V on the input. Output: 4.9VDC +/- .1V 1.2Amp MAX

• Ultra Compact Design
• High Intensity LEDs
• Keep Stock Light Bar
• Includes Rock Lights
• Plug and Play

Take your TRX4 Bronco to the next level with MyTrickRC's TRX4 Bronco Light Kit!  This kit includes the well known Attack High Power Headlights,  Front and Side Marker Lights, and Tail Lights. The kit is fully expandable, with the ability to add Rock Lights, Light Bars, and Spot Lights.  

The TRX4 Bronco Light Kit has some great features including Easily Expandable add Rock Lights, Light Bars, and Spot Lights, Waterproof LEDs, Scale Lights, and more! This is great for power management. simple Plug and Play Installation, and it was built specifically to fit your truck.  Also, we offer a detailed instruction video to make installation easy. The kit comes standard with our DG-1 Light Controller; a sleek, easy to setup, and simple to use light controller featuring 6 individual output ports 4 standard power and 2 High power. This port configuration gives you the ability to create various combinations of 3 and 5mm LEDs, Rock Lights, etc. in various colors! 

Minor modifications to the body are required for installation.

This kit also works with the High Trail TRX4 Bronco!

                Back in Stock!

TRX4 Bronco Light Kit Includes:

• DG-1 Controller
• 1pcs Attack High Power Headlights
• 1pcs 5mm Dual Red Tail Lights
• 1pcs 3mm Dual Front Turn Signal Marker Lights
• 1pc 3mm Quad Front and Rear Side Marker Lights
• 1pc 3D printed LED mounts

NOTE - for Traxxas Battery users

A Traxxas Battery Adapter (sku MYK-RTX) is required with this kit if you plan to use a Traxxas Battery on your vehicle.

Traxxas Battery Adapter

OPTIONAL - Rock Light available are for this vehicle:

4-LED Rock Light Set

8-LED Rock Light Set

• High Power Headlights
• Side Marker Lights
• Tail Lights
• Reverse Lights
• DG-1 Controller

Axial Early Bronco Light Kit

Axial Early Bronco Light Kit!  This kit includes the NEW Attack Halogen High Power adjustable brightness Headlights, Front Marker Lights and Tail Lights. The kit is fully expandable, with the ability to add Rock Lights and more light bars.  

The Axial Early Bronco Light Kit has some great features including Adjustable Brightness on multiple ports Headlights, Light Bars and LEDs. This is great for power management, simply Plug and Play Installation, and it was built specifically to fit your truck.

Minor modifications to the body (Windshield) are required for installation. 

NOTE:

Installation Video shows a DG-1 Dragon Controller, however this kit now comes with an HB-2 Controller instead.  Simply plug Headlights into HB-2 Port D, Light Bars & Rock Lights into ports E and F.  3mm and 5mm LEDs plug into ports A, B, or C.  The HB-2 doesn't have any remote functions.   

Includes:

• HB-2 LED Light Controller
• 1pc Attack  6" Light Bar
• 1pc Attack  2" Light Bar
• 1pc Attack  Halogen High Power Headlights
• 1pc 5mm Dual Red Tail Lights
• 1pc 5mm Dual Amber Front Marker Lights
• 1pc 3D printed LED mounts

• Halogen Headlights
• 6" and 2" Light Bars
• Tail/Brake Lights
• Expandable
• MyTrickRC Stickers

Axial SCX10 III Rubicon Light Kit 

The perfect complement to your Rubicon, is the ability to go at anytime; day or night!

The MyTrickRC Deluxe Axial SCX10 III Rubicon Light Kit Completes your Axial Rubicon build!

Axial did an amazing  job on the SCX10 III Rubicon by adding Tons of Scale Features, so we also pulled out all the stops on this kit, with a long list of killer features like Dual Light Headlights that have Crazy Bright White Halos on the outside plus Separate Center LED.

The Axial SCX10 III Rubicon Light Kit also comes with Rock Lights which include an inline quick disconnect, so that you can easily separate the body from the chassis. Plus Tail/Brake Lights, and Interior Lights!   For sure, our Axial SCX10 III Rubicon Light Kit takes it to the next level! 

But in addition to all this, numerous 3D printed parts for Headlights, Tail Lights, Rock Lights, and Interior Lights come included.  This makes the Axial SCX10 III Rubicon Light Kit Easier than Ever to install and get Awesome Results!  True to the MyTrickRC philosophy, the Axial SCX10 III Rubicon Light Kit kit is a direct fit to the Rubicon, and doesn't require any cutting or gluing. Now that's how to Trick Out your RC!  Outfit your Axial Rubicon build with the MyTrickRC Deluxe Axial SCX10 III Rubicon Light Kit, and have more Safety, and Fun on the trail! 

Features:

• Crazy Bright Dual Headlight Setup
• Interior Lighting and Rock Lights
• Brake Lights 
• Quick Disconnect to separate Body from Chassis
• Easy Installation  Plug and Play
• On/Off Switch

Kit Includes:

• HB-2 Lighting Controller
• 1 Pair High Power White Halo Headlights
• 1 Pair 5mm Dual White (Center Headlight LED)
• 1 Pair 5mm Dual Red (Tail/Brake)
• 1 Pair High Power Headlights (Interior)
• 2 Pair High Power Rock Lights
• 1 pc Port Conversion Cable (for Center Headlights)
• 1 pc 4-Way LED Splitter (for Rock Lights)
• 1 Set 3D Printed Parts (for Headlights, Interior, Rock Lights)
• Zip Ties and Zip Tie Mounts for clean wiring management
• Attack Scale Bumper Stickers

NOTE 

        This kit is recommended for use on the Axial Gladiator, however our 3D printed Tail Light inserts aren't meant to be used on the Gladiator. Also, the Dashboard Lights require you to cut the Dashboard, fabricate a clear lens, and transfer of stickers. This is only recommended for advanced modelers.

• Dual Headlights
• Interior Lights
• Rock Lights
• Plug and Play
• HB-2 Controller

Element Knightrunner Light Kit

The perfect complement to your Knightrunner, is the ability to go at anytime; day or night!

The Element RC Knightrunner Light Kit is a Deluxe, Hight Power, Light Kit based on the HB-2 Controller and it really completes the Overlander look for this beautiful truck.  Plus the Element Knightrunner Light Kit pumps out TONs of Light, so any of your friends who don't have this kit will be envious of the Scale Look and amazing performance.  

The Element Knightrunner Light Kit is very easy to install, and add future Light Bars, Rock Lights, Wafers, or other accessory LEDs to.  Look for more Sweet accessory lighting from from MyTrickRC for this truck, we are working on them now! 

Features:

• ON/OFF Switch
• Easy Installation 
• Waterproof Controller and LEDs
• In-Line Quick Disconnects between Body and Chassis

Kit Includes:

• 1-HB-2 Controller
  
• 1-Attack Headlights
• 2-Attack Rock Lights
• 1-3mm Dual Amber 
• 1-3mm Dual White
• 1-5mm Dual Red 
• 1-4-Way LED Splitter
• 1- 27mm White Strip LED
• 1- L7 3D Printed PODs & Lenses

Installation Notes

• This light kit was designed to work with all the light bucket files offered by Knight Customs, so it's plug and play!
• Installing our attack headlights will work with the Knight customs LED mount

Attack 1" L7 Pods Bar Install Notes

• Align Light Bars then drill holes in Bumper for M2 screws. 
• Use a body reamer or pen vise to start a hole using the Light Bar as a guide
• Screw Light Bars in place

Install your M2.5 screw directly into the plastic bumper, creating threads Reinstall screw with Attack L7 in place

• HB-2 Controller
• Sleek L7 Pod
• Rock Lights
• Running Lights
• Expandable

Traxxas TRX4 Bronco Light Kit HB-2

Trick Out your Traxxas TRX4 Bronco with a MyTrickRC Light Kit! This Kit includes our well known Attack High Power Headlights as well as Tail Lights and plenty of Marker Lights. The result is an authentic Scale looking vehicle.

At the heart of this Kit is our HB-2 Lighting Controller which features 6 individual Output Ports (2 High Power, 1 Headlight, and 3 Standard Low Power). These give you plenty of freedom to Expand - easily add one of our super bright Light Bars or Rock Lights or Spot Lights!

Installation is simple Plug and Play - no soldering required. Note that minor modifications to the Body are required for installation.

TRX4 Bronco Light Kit Includes:

• 1 Pair of Attack High Power Headlights
• 1pc 5mm Dual Red Tail Lights
• 1pc 3mm Dual Orange Front Marker Lights
• 1pc 3mm Quad Red/Orange Rear/Front Side Marker Lights
• 1set LED Mounts
• HB-2 Lighting Controller

NOTE - for Traxxas Battery users

A Traxxas Battery Adapter (sku MYK-RTX) is required with this kit if you plan to use a Traxxas Battery on your vehicle.

Traxxas Battery Adapter

OPTIONAL - Rock Light available are for this vehicle:

4-LED Rock Light Set

8-LED Rock Light Set

• High Power Headlights
• Tail Lights
• Front Marker Lights
• Side Marker Lights
• HB-2 Controller

Vanquish VS4-10 and Phoenix Light Kit 

Want a serious Light Kit for your VS4-10 or Phoenix? Look no further than MyTrickRC's Vanquish VS4-10 and Phoenix Light Kit. 

The Vanquish VS4-10 Phoenix Light Kit includes High Power Attack Headlights, Rock Lights, and Tail lights. Additionally, the Vanquish VS4-10 and Phoenix Light Kit is expandable, so if you want to add more Rock Lights, Running Lights, Interior Lights, or a Light Bar you easily can.  

This kit works equally well with the original VS4-10 and Phoenix Limited, and the Pro. 

Vanquish VS4-10 and Phoenix Light Kit features:

• Waterproof LEDs

• Easy Installation

• In-Line Quick Disconnects between Body and Chassis

Includes:

• HB-2 LED Light Controller 
• 1 Pair of Attack High Power Headlights
• 2 Pairs Attack Rock Light Pods
• 1 Pair 5mm Tail Lights
• 3D Printed Headlight Bezels
• Zip Ties and Zip Tie Mounts for clean wiring managment
• MyTrickRC Stickers

Vanquish VS4-10 and Phoenix Light Kit Highlights

• Simple Installation
• 3D Printed Headlight
• Rock Lights Included
• Tail Lights

Rock light Installation Photos