Products
2 Headlight Car Kit
The 2 Headlight Car Kit is MyTrickRC’s first ever RC Car Light Kit, and it's still one of our most popular Kits!
This simple, yet powerful Kit lets you have Headlights, Tail/Brake Lights, and 4 orange Turn Signals that can be set to operate while turning!
At the heart of this Kit is our UF-7C Light Controller capable of running 4.5 to 12VDC at 2amps and is 100% Waterproof!
Here are a few of the UF-7C's modes: Off Road Modes with Optional Remote On/Off Control, Center Brake Light, Backfire, Automatic Hazard Lights, additional Emergency Strobes, and MORE!
This system is Plug and Play, and requires no soldering or fuss. The Kit includes all parts needed for installation. Still have questions? Check out our detailed Installation Videos where we walk you though the whole installation process! MyTrickRC is all about great value, and helping you get the best results possible from your builds.
2 Headlight Car Kit Includes:
- 1 - UF-7 Controller
- 4 - 3mm Single Amber Light
- 1 - 5mm Dual Red Light
- 1 - 5mm Dual White Light
- 1 - UF-7 9V Power Cable
- 1 - UF-7 Y-Splitter
- UF-7C Controller
- 2pc Headlights
- Tail/Brake & Turn
- Center Brake
- Reverse
4 Headlight Car Kit
4 Headlight Car Kit
The 4 Headlight Car Kit is a 4 headlight/tail light version of our 2 Headlight Car Kit; the first RC Car Light Kit MyTrickRC ever made!
This simple, yet powerful kit lets you have 4 headlights, 4 tail/brake lights, and 4 orange turn signals that can be set to operate while turning!
At the heart of this kit is our UF-7C Light Controller capable of running 4.5 to 12VDC at 2amps and is 100% Waterproof!
Here are a few of the UF-7C's modes: Off Road modes with Optional Remote On/Off Control, Center Brake Light, Backfire, Automatic Hazard Lights, additional Emergency Strobes, and MORE!
This system is Plug and Play, and requires no soldering or fuss. All parts needed for installation are included in the kit. Still have questions? Check out our detailed Installation Videos where we walk you though the whole installation process! MyTrickRC is all about great value, and helping you get the best results possible from your builds.
Headlight Car Kit Includes:
- UF-7C Light Controller
- 2pcs 3mm Dual WHITE Headlights
- 1pcs 3mm Dual RED Tail-Brake Lights
- 2pcs 3mm Single RED Tail Turn Signals
- 2pcs 3mm Single ORANGE Front Turn Signals
- UF-7 Lighting Controller
- 2 Power Y-Cable for Tail/Brake & Turn Signal function
- 9V battery Adapter
- Mounting Hardware
- UF-7C Controller
- 4pc Headlights
- Tail/Brake & Turn
- Center Brake
- Reverse
AB-101 Backfire Kit
Out of Stock
Looking to add a scale backfire light to you Drift Car, Street Car, or Basher!? The AB-101 Backfire Kit is a simple to install, low cost way to make it happen!
The AB-101 Backfire Kit comes standard with our SQ-1 Light Controller. An easy to use, plug-n-play controller that taps into your vehicles receiver for power and throttle signal. The SQ-1 was developed with direct input and testing by leaders in the drift community. The SQ-1's Backfire function went through months of testing and refinement to get the final scale effect we were looking for.
Installation is super simple, and the system is easily expandable. Adding more LEDs & functions like Brake, Reverse, Running Lights, Hazard, Etc., is easy. Just plug them in and go!
Some other great features are the SQ-1's compact size, minimizing weight and area needed for installation. Also, the AB-101 Backfire Kit is 100% waterproof! So if you ever want to Drift or Bash in the Rain it's no problem. The SQ-1 also comes with a Quick Disconnect cable so it's a snap to remove and re-attach the body from chassis.
AB-101 Backfire Kit Includes:
- SQ-1 Controller
- 1pc 3mm Single ORANGE Backfire LED
- Mounting Hardware
- Quick Disconnect Cable
- SQ-1 Controller
- 1pc Scale Backfire
- Expandable
- Waterproof
- Compact
AB-1402 Drift Car Kit
AB-1402 Drift Car Kit
Looking to take your drift car build to the next level!? The AB-1402 Drift Car Kit is for you!
The AB-1402 Drift Car Kit comes standard with 4 headlights, 4 tail/brake, reverse, 2 backfire lights, and you also get hazard lights!
Our SQ-1 Light Controller. An easy to use, plug-n-play controller that taps into your vehicle’s receiver for power and throttle signal. The SQ-1 was developed with direct input and testing by leaders in the drift community. The SQ-1's Backfire function went through months of testing and refinement to get the final scale effect we were looking for.
Installation is super simple, and the system is easily expandable. Adding more LEDs & functions like Brake, Reverse, Running Lights, Hazard, Etc., is easy. Just plug them in and go!
Some other great features are the SQ-1's compact size, minimizing weight and area needed for installation. Also, the AB-1402 Drift Car Kit is 100% waterproof! So, if you ever want to Drift or Bash in the Rain it's no problem. The SQ-1 also comes with a Quick Disconnect cable so it's a snap to remove and re-attach the body from chassis.
AB-1402 Drift Car Kit Includes:
- 1pcs SQ-1 Lighting Controller
- 2pcs 5mm Dual White Headlight LEDs
- 2pcs 5mm Dual RED Tail/Brake LEDs
- 1pcs 5mm Dual AMBER Running Light LEDs
- 1pcs 3mm Dual ORANGE Backfire LEDs
- Quick Disconnect Power Cable (easy to remove body)
- Mounting Hardware
- SQ-1 Controller
- Deluxe Drift Kit
- 4pc Head & Tail Lights
- 2pc Scale Backfire
- Auto-Hazard Lights
AB-701 Drift Car Kit
AB-701 Drift Car Kit
Looking to take your drift car build to the next level!? The AB-701 Drift Car Kit is for you!
The AB-701 Drift Car Kit comes standard with headlights, tail/brake, reverse, a backfire light, and you also get hazard lights!
Our SQ-1 Light Controller. An easy to use, plug-n-play controller that taps into your vehicle’s receiver for power and throttle signal. The SQ-1 was developed with direct input and testing by leaders in the drift community. The SQ-1's Backfire function went through months of testing and refinement to get the final scale effect we were looking for.
Installation is super simple, and the system is easily expandable. Adding more LEDs & functions like Brake, Reverse, Running Lights, Hazard, Etc., is easy. Just plug them in and go!
Some other great features are the SQ-1's compact size, minimizing weight and area needed for installation. Also, the AB-701 Backfire Kit is 100% waterproof! So, if you ever want to Drift or Bash in the Rain it's no problem. The SQ-1 also comes with a Quick Disconnect cable so it's a snap to remove and re-attach the body from chassis.
AB-701 Drift Car Kit Includes:
- 1pc SQ-1 Controller
- 1pc 5mm Dual WHITE Headlights
- 1pc 5mm Dual RED Tail-Brake Lights
- 1pc 5mm Dual AMBER Front Running
- 1pc 3mm Single ORANGE Backfire
- Power Y-Cable with Quick Connect
- Mounting Hardware
- SQ-1 Controller
- 2pc Headlights
- 2pc Tail/Brake Lights
- 1pc Backfire
- Expandable
Arrma Felony LED LIght Kit
MyTrickRC's Arrma Felony LED Light Kit takes your, already badass car to the next level!
Using MyTrickRC's super versatile Wafer LEDs combined with our powerful UF-7R controller, the Arrma Felony Kit completes the wicked attitude of the Arrma Felony.
So what makes the Arrma Felony Kit so incredible? Start with the sleek design of the Carbon Nylon custom 3D Printed Headlight and Tail Lights that match the bodies geometry. These MyTrickRC designed parts perfectly compliment the Rebel styling of the Arrma Felony. And with our powerful new UF-7R Controller you get functioning Tail/Brake Lights, Reverse and Backfire! MyTrickRC's Arrma Felony Kit is an insane kit for an insane car.
One of the great aspects of the Arrma Felony Kit is how easy it is to expand your light system. Want to add Underglow? It's a snap with the Arrma Felony Kit. Simply glue LEDs in place, and connect to the controller.
Arrma Felony Kit Includes:
- 1 - UF-7R Light Controller
- 1 - 27mm White Linear Wafer LEDs with Lenses
- 1 - 9mm White Square Wafer LEDs with Lenses
- 2 - 27mm Red Linear Wafer LEDs
- 1 - 3mm Dual Orange LEDs with Conical Lens
- 1 - 3mm Dual White LEDs for Reverse
- 1 - 3mm Dual Yellow LEDs for Backfire
- 3D printed buckets
- Zip Ties and Zip Tie Mounts for clean wiring management
- MyTrickRC Scale Bumper Stickers
- UF-7R Controller
- Tail/Brake LEDs
- Reverse Lights
- Backfire
- Expandable
Attack Super 1200 Package
Attack Super 1200 Drift Kit
Inspired and Proven by the Los Angeles RC Drift Scene, the Attack Super 1200 Package is our most Deluxe Drift Light System. With 9 Blink Patterns for Scale Drift Cars to Scale Street Cars, including wild RC Drift Patterns like Crossfire, Alien, and Wig Wag, the Attack Super 1200 Package offers tons of Lighting Configuration Options!
Also, since the Attack Super 1200 Package is based on our Drift-X Controller, it includes our finely tuned Throttle Response Backfire and Automatic Hazard Lights. All MyTrickRC Light Systems are Plug and Play, and easily expandable if you want to reconfigure or add onto your system. MyTrickRC focuses on making High Quality, Dependable, Lighting Systems that give you the Best Value and Most Fun from the Hobby.
Unlike those frustrating systems you find online, the Attack Super 1200 Package is a Deluxe Light System that is designed to perform as promised for years to come, and easily outlive multiple bodies. The Drift-X Controller is so Rock Solid in its performance that we don't get returns on them, instead we get compliments on how much our customers love it. Join the club, and find out how awesome your RC Lighting can be.
Features:
- Drift-X Controller was forged by RC Drift enthusiasts
- Super realistic Backfire when you let off throttle
- Automatic Hazard Lights
- Excellent blink patterns including Wig Wag, Crossfire, Alien, and others
- 3rd Channel Control of Drift Patterns
- Two versions of Turn Signal for Scale Cars
Attack Super 1200 Kit Includes:
- Drift-X Deluxe Lighting Controller
- 4pc 5mm Single WHITE Headlights
- 4pc 5mm Single RED Tail-Brake Lights
- 2pc 5mm Single AMBER Turn Signals
- 1pc 3mm Dual ORANGE Front Turn Signals
- 2pc Power Y-Cable for Tail/Brake & Turn Signal function
- 9V battery Adapter
- Mounting Hardware
- Drift-X Controller
- Premium Drift Kit
- 2pc Scale Backfire
- Automatic Hazard Lights
- Exotic Blink Patterns
AV-1402 Vintage Car Kit
AV-1402 Vintage Car Kit Overview
MyTrickRC's Afterburner AV-1402 Vintage Car Kit offers tons of value for a low price, with a Vintage Twist.
The AV-1402 Vintage Car Kit is a Deluxe Lighting System with Vintage Halogen Headlight LEDs and uses the SQ-1 Controller to it's maximum potential. With MyTrickRC, you can always count on quality lighting kits, that perform the way we claim it will.
Well tested, and highly acclaimed by those in the Drift Community, the AV-1402 Vintage Car Kit offers Dual Halogen Headlights, Tail/Brake, Reverse, and Dual Backfire. With the AV-1402 Vintage Car Kit you also get auto-Hazard Lights!
The AV-1402 Vintage Car Kit uses the SQ-1 Lighting Controller and is super simple to install. With just one cable to the Receiver, you get all the great functions and features of the SQ-1 Controller! Everything you need to install is included.
AV-1402 Vintage Car Kit Includes:
- 2pcs 5mm Dual Halogen Headlights (Warm White)
- 2pcs 5mm Dual RED Tail/Brake LEDs
- 1pcs 5mm Dual AMBER Running Light LEDs
- 1pcs 3mm Dual ORANGE Backfire LEDs
- SQ-1 Lighting Controller Power Cables to power off your car’s receiver
- Quick Disconnect Cable makes it easy to remove body
- Mounting Hardware
- SQ-1 Controller
- Vintage Drift Kit
- 4pc Halogen Headlights
- 2pc Scale Backfire
- Auto-Hazard Lights
Axial 2017 Wrangler Light Kit HB-2
Axial 2017 Wrangler Light Kit HB-2
Trick out your Axial 2017 Wrangler with a MyTrickRC Light Kit!
- 5" Light Bar, High Power Headlights, Rear Tail Lights, Front Marker Lights
- Sleek looking LED Headlights and Curved Light Bars
- 5" Attack Light Bar mounts to Roof - Installation is super easy
- Ultra Bright LEDs, MyTrickRC does not compromise on component quality
- Impact Resistant Light Bar Design can take a beating
- 6 Output Ports (2 Hi-Power / 1 Headlight / 3 Standard)
- ON/OFF Switch so you can turn off the lights to save battery and prevent over-discharge
- Expandable System - Adding More Lights is Plug-and-Play! Easily add Rock Lights or Underglow
Axial 2017 Wrangler Kit Includes:
- 1pc 5" Attack High Power Light Bar with Mounts
- 1pc Attack High Power Headlights
- 1pc 5mm Dual Red Tail Lights
- 1pc 5mm Dual Yellow/Amber Front Marker Lights
- 1pc HB-2 Lighting Controller
- Zip Ties and Zip Tie Mounts
- MyTrickRC Stickers
- Ultra Bright System
- 5" Light Bar & Headlights
- Tail & Front Markers
- HB-2 Controller
- Easily Expandable
Axial Blazer Vintage Light Kit
Axial Blazer Vintage Light Kit
The Axial Blazer Vintage Light Kit is a Clean and Simple Way to get an Awesome Scale Look on your Axial Blazer!
You'll be impressed how much the Axial Blazer Vintage Light Kit adds to the 69 Blazer stock body. Folks who have seen it love the look of the Halogen Headlights, not to mention the Scale Running Lights, Working Brake and Reverse Lights.
This kit also includes Tail Light Buckets, and Automatic Hazard Lights so you can get the best results! Oh, did we mention Remote ON/OFF 3rd Channel Control of the Lights? Yes, that's how Insanely Awesome the Axial Blazer Vintage Light Kit is!
Also, with the UF-7C Controller, you can also easily add more lights if you want. This might include Side Markers, Additional Canisters that came with the Truck, Blinking Dust Light, Halogen Lights for the Stock Light Canisters, or even a couple sets of Spot Lights to use as Rock Lights (Rock Lights power directly off the Receiver).
Features:
- Scale Halogen Headlights, Rear Tail/Brake Lights, Front Running Lights and Reverse
- 3D printed Taillight Buckets
- Automatic Hazard Lights
- Remote ON/OFF Control of all LEDs on 3rd Channel
- Expandable System = Easily add MyTrickRC Spotlights (as Rock Lights) or Light Bar
- Rock Solid UF-7C Lighting Controller is a is an Industry Leader for Quality Scale Lighting solutions
- High Quality Components
Includes:
- 1pc UF-7C Lighting Controller
- 1pc 5mm Dual HALOGEN Headlights
- 1pc 3mm Dual ORANGE Running Lights
- 1pc 3mm Dual RED Tail/Brake Lights
- 1pc 3mm Dual WHITE Lights
- 1pc Extra Power Cable for Remote On/Off Control
- 1pc 3D Printed Taillight Buckets
- Zip Ties and Zip Tie Mounts for clean wiring management
- Attack Scale Bumper Stickers
NOTE - Light Bucket Installation requires scraping off paint under the taillight stickers. Be careful to make sure the you scrape per the sticker location. Lines molded on the body may not match the taillight stickers location so start by scraping a small dot, then verify its position by shining light through the area scraped.
- Scale Light System
- UF-7C Controller System
- Halogen Headlights
- Easily Add More Lights
- Tail/Brake + Reverse
Axial Capra Light Kit
The Axial Capra Light Kit is the perfect compliment to your Axial Capra!
The MyTrickRC Axial Capra Light Kit is nice and compact, and offers some great features including High Power Headlights and Rock Lights. No Lighting controller needed on this one, its all powered off our Standard Light Bar Power Regulator, drawing power directly from the receiver!
It's Plug and Play and the Lights will be ON whenever the truck is On. With the Axial Capra Light Kit you can keep the stock Light Bar untouched, retaining the sleek look of the stock truck.
Features:
- Hi Performance / Low Cost
- Easy Installation
- Minimal Wiring
- Plug and Play
Includes:
- MyTrickRC Light Bar Regulator
- 1 Pair High Power Headlights
- 2 Pair High Power Rock Lights
- 1pc 3-Way LED Splitter
- Zip Ties and Zip Tie Mounts for clean wiring management
- Attack Scale Bumper Stickers
The Standard Light Bar Regulator is NOT for use with 3mm and 5mm LEDs, it will burn them up immediately! Do not connect more lights than your Receiver and ESC are rated for. Input 4.5-9VDC DO NOT Exceed 9V on the input. Output: 4.9VDC +/- .1V 1.2Amp MAX
- Ultra Compact Design
- High Intensity LEDs
- Keep Stock Light Bar
- Includes Rock Lights
- Plug and Play
Axial Deadbolt Light Kit HB-2
Axial Deadbolt Light Kit
The perfect complement to a 'go anywhere' vehicle, is the ability to go at anytime; day or night!
The Axial Deadbolt Lighting Kit is the perfect upgrade to push your build to the next level.
Features:
- Sleek looking LED Headlights and Curved Light Bars
- Attack High Powered Headlights
- Expandable System = Adding More Lights is Plug-and-Play
- Ultra Bright LEDs, MyTrickRC does not compromise on component quality
- Impact Resistant Light Bar Design can take a beating
- HB-2 LED Light Controller is easy to wire up, can be powered directly off your Battery.
Includes:
- 1- HB-2 Controller
- 1- 5" Attack Light Bar
- 2- Pair High Power Spot Lights
- 1- 3mm Dual Red Tail/Brake Lights
- 1- 3mm Dual Amber Running Lights
- 1- 4-Way LED Splitter
- Zip Ties and Zip Tie Mounts for clean wiring management
- MyTrickRC Stickers
- HB-2 Controller
- 5" Attack Light bar
- 2" Light Bar
- 1pc Rock Lights
- Plug and Play
Axial Early Bronco Light Kit HB-2
Axial Early Bronco Light Kit
Axial Early Bronco Light Kit! This kit includes the NEW Attack Halogen High Power adjustable brightness Headlights, Front Marker Lights and Tail Lights. The kit is fully expandable, with the ability to add Rock Lights and more light bars.
The Axial Early Bronco Light Kit has some great features including Adjustable Brightness on multiple ports Headlights, Light Bars and LEDs. This is great for power management, simply Plug and Play Installation, and it was built specifically to fit your truck.
Minor modifications to the body (Windshield) are required for installation.
NOTE:
Installation Video shows a DG-1 Dragon Controller, however this kit now comes with an HB-2 Controller instead. Simply plug Headlights into HB-2 Port D, Light Bars & Rock Lights into ports E and F. 3mm and 5mm LEDs plug into ports A, B, or C. The HB-2 doesn't have any remote functions.
Includes:
- HB-2 LED Light Controller
- 1pc Attack 6" Light Bar
- 1pc Attack 2" Light Bar
- 1pc Attack Halogen High Power Headlights
- 1pc 5mm Dual Red Tail Lights
- 1pc 5mm Dual Amber Front Marker Lights
- 1pc 3D printed LED mounts
- Halogen Headlights
- 6" and 2" Light Bars
- Tail/Brake Lights
- Expandable
- MyTrickRC Stickers
Axial Honcho Light Kit HB-2
Axial Honcho Light Kit HB-2
The perfect complement to any Honcho is the ability to go at anytime day or night!
MyTrickRC's Axial SCX10.2 Honcho Light Kit Completes your Axial Honcho build. The SCX10.2 Honcho has a long list of killer features like Attack Headlights that are Crazy Bright. The Axial SCX10.2 Honcho Light Kit also is ready to add Rock Lights. For sure, our Axial SCX10.2 Honcho Light Kit takes it to the next level!
But in addition we include parts for roof Light Bars. This makes the Axial SCX10.2 Honcho Light Kit Easier than Ever to install and get Awesome Results! True to the MyTrickRC philosophy, the Axial SCX10.2 Honcho Light Kit is a direct fit to the 10.2 Honcho, and does require some cutting or gluing. Plus the Axial SCX10.2 Honcho Light Kit is super Expandable, so you can always add Light Bars and other Attack lights if you want. Now that's how to Trick Out your RC! The kit comes standard with our HB-2 Light Controller; a sleek, easy to setup, and simple to use Light Controller featuring 6 individual Output Ports (2 High Power, 1 Headlight, and 3 Standard Low Power). This Port configuration gives you the ability to create various combinations of 5 and 3mm LEDs, Rock Lights, etc. in various colors!
- 5" Light Bar, Attack High Power Headlights, Rear Tail Lights, Front Marker Lights
- Sleek looking LED Headlights and Curved Light Bars
- 5" Attack Light Bar mounts to Roof. Installation is super easy
- Expandable System = Adding More Lights is Plug-and-Play
- HB-2 Lighting Controller
- Ultra Bright LEDs, MyTrickRC does not compromise on component quality
- Impact Resistant Light Bar Design can take a beating
Axial 10.2 Honcho Light Kit Includes:
- 1pc 5" Attack Light Bar with Custom Mounts (attaches to roll cage using existing screws)
- 1pc Attack High Power Headlights
- 1pc 3mm Dual Yellow/Amber Marker Lights
- 1pc 3mm Dual Red Tail Lights
- 1pc HB-2 Lighting Controller
- Zip Ties and Zip Tie Mounts
- Attack Scale Bumper Stickers
- Ultra Bright System
- 5" Light Bar
- Attack Headlights
- Tail Lights
- HB-2 Controller
Axial Jeep XJ Attack Light Kit HB-2
Axial Jeep XJ Attack Light Kit
The perfect complement to your Axial Jeep XJ is the ability to go at Anytime - Day or Night!
The Axial Jeep XJ Attack Light Kit is a Clean and Simple Way to get an Awesome Scale Look on your Axial XJ. You'll be impressed how much the Axial XJ Attack Light Kit adds to the Jeep XJ stock body. Folks who have seen it love the look of the super bright Attack Headlights, not to mention the Scale Running Lights. Yes, that's how Insanely Awesome the Axial Jeep XJ Light Kit is!
Also, with the HB-2 Controller, you can also easily add more lights if you want. This might include Side Markers, Additional Canisters that came with the Truck, Dust Light, Halogen Lights for the Stock Light Canisters, or even a couple sets of Spot Lights to use as Rock Lights (Rock Lights power directly off the Receiver). The kit comes standard with our HB-2 Light Controller; a sleek, easy to setup, and simple to use light controller featuring 6 individual output ports 3 standard power, 1 mid power, and 2 High power. This port configuration gives you the ability to create various combinations of 3 and 5mm LEDs, Rock Lights, etc. in various colors!
Features:
- Super Bright Attack 19mm Rectangular Headlight
- 3D Printed Tail Light Buckets
- ON/OFF Switch
- Expandable System = Easily add MyTrickRC Spot Lights (as Rock Lights) or Light Bar
- HB-2 Lighting Controller
- High Quality Components
Kit Includes:
- 1pc HB-2 Lighting Controller
- 1pc 5" Attack Light Bar
- 1pc Dual Attack 19mm Rectangular Headlights
- 1pc Quad 3mm ORANGE, RED Running Lights
- 1pc 3mm Dual WHITE Reverse Lights
- 1pc 3D Printed Tail Light Buckets
- MyTrickRC Scale Bumper Stickers
- Zip Ties and Zip Tie Mounts for clean wiring management
NOTE - Light Bucket Installation requires scraping off paint under the tail light stickers. Be careful to make sure that you scrape per the sticker location. Lines molded on the body may not match the tail light stickers location so start by scraping a small dot, then verify its position by shining light through the area scraped.
- Scale Light System
- HB-2 Controller
- Attack 19mm Rectangular Headlights
- Easily Add More Lights
- Tail, Brake
Axial RR10 Bomber Light Kit HB-2
Axial RR10 Bomber Light Kit
The perfect complement your Bomber, is the ability to go at anytime; day or night!
The Axial RR10 Bomber Light Kit is nice and compact, and offers some great features including High Power Headlights and Rock Lights and rear lighting with functioning Tail/Brake lights. Also, the Axial RR10 Bomber Light Kit is Plug and Play! The Axial RR10 Bomber Light Kit is Super Bright, and really takes your Bomber to the Next Level.
Features:
- Hi Performance
- Easy Installation
- Plug and Play
- Waterproof
- On/Off Switch
Axial RR10 Bomber Light Kit Includes:
- HB-2 Controller
- 2 Pair High Power Spot Lights
- 1pc 3-Way LED Splitter
- 5 Inch Attack Light Bar
- 2 Inch Attack Light Bar
- 3D Printed Light Bar Mounts
- 1-5mm Dual Red
- 1-5mm Dual Amber
- Zip Ties and Zip Tie Mounts for clean wiring management
- Attack Scale Bumper Stickers
- Ultra Compact Design
- High Intensity LEDs
- Keep Stock Light Bar
- Includes Rock Lights
- Plug and Play
Axial Ryft Attack Light Kit
Axial Ryft Attack Light Kit
The Axial Ryft Attack Light Kit is the perfect compliment to your Axial Ryft RBX10.
The MyTrickRC Axial Ryft RBX10 Attack Kit is nice and compact, and offers all High Power LED Headlights with Mounting Bracket, Taillight Bar and Rock Lights.
Our UF-7R Lighting Controller comes on this kit, and it draws power directly from the receiver. The Axial Ryft RBX10 Attack Light Kit is Plug and Play and the Lights will be ON whenever the truck is On.
Features:
- Hi Performance / Integrated Light Buckets
- Insanely Bright Light Kit for your Ryft
- Easy Installation
- Minimal Wiring
Includes:
- UF-7R Controller
- 1 Pair of White Attack 27mm Strip Headlights
- 1 Pair of Red Attack 27mm Strip Tail Lights
- 2 Pair High Spot Lights
- 1pc 3-Way LED Splitter
- Zip Ties Set
- Attack Scale Bumper Stickers
- Custom Headlight and Tail Light Mounts
- 1 Y-Cable for ESC
NEW Improved Design Instructions:
STEP 1 - Remove Excess Support Material from Parts
STEP 2 - Insert LED into Rear Light Bar with LEDs facing outward as shown. NEVER pull on LEDs, always push LED through hole. The flexible part of the LED is somewhat fragile and can break if you twist them too much during installation.
STEP 3 - Gently bend the LED onto it's own wire as shown
STEP 4 - Apply Zap Goo, Shoe Goo, or E6000 to LED pockets of Light Bar
STEP 5 - Push wire into glue, then apply a second layer for the LED to bond to
STEP 6 - Apply a SMALL amount of glue to the top of the PCB. BE CAREFUL not to get glue on the LEDs. If you do, then wipe it off before installing the lenses. Only a SMALL amount of glue is needed here
STEP 7 - Press in the Lenses. Tail Lights are DONE!
STEP 8 - Apply Zap Goo, Shoe Goo, or E6000 to LED to the Headlight Bracket as shown
STEP 8 - Place the LED as shown, with the flexible end hanging off the part. We recomend that you apply a small amount of tape to hold the LED in position before doing the other side.
STEP 9 - Once LED glue is fully set, wrap the wire around the Bracket. Be sure to hook the wires into the small C clip on the Bracket. Apply a more generous amount of glue here to both the C Clip area, and the flexible part of the LED to provide it good support after drying. You are DONE installing the LEDs!
- Ultra Compact Design
- High Intensity LEDs
- Includes SpotLights
- Plug and Play
- Tail Light Bar
Axial SCX10 III Rubicon Light Kit HB-2
Axial SCX10 III Rubicon Light Kit
The perfect complement to your Rubicon, is the ability to go at anytime; day or night!
The MyTrickRC Deluxe Axial SCX10 III Rubicon Light Kit Completes your Axial Rubicon build!
Axial did an amazing job on the SCX10 III Rubicon by adding Tons of Scale Features, so we also pulled out all the stops on this kit, with a long list of killer features like Dual Light Headlights that have Crazy Bright White Halos on the outside plus Separate Center LED.
The Axial SCX10 III Rubicon Light Kit also comes with Rock Lights which include an inline quick disconnect, so that you can easily separate the body from the chassis. Plus Tail/Brake Lights, and Interior Lights! For sure, our Axial SCX10 III Rubicon Light Kit takes it to the next level!
But in addition to all this, numerous 3D printed parts for Headlights, Tail Lights, Rock Lights, and Interior Lights come included. This makes the Axial SCX10 III Rubicon Light Kit Easier than Ever to install and get Awesome Results! True to the MyTrickRC philosophy, the Axial SCX10 III Rubicon Light Kit kit is a direct fit to the Rubicon, and doesn't require any cutting or gluing. Now that's how to Trick Out your RC! Outfit your Axial Rubicon build with the MyTrickRC Deluxe Axial SCX10 III Rubicon Light Kit, and have more Safety, and Fun on the trail!
Features:
- Crazy Bright Dual Headlight Setup
- Interior Lighting and Rock Lights
- Brake Lights
- Quick Disconnect to separate Body from Chassis
- Easy Installation Plug and Play
- On/Off Switch
Kit Includes:
- HB-2 Lighting Controller
- 1 Pair High Power White Halo Headlights
- 1 Pair 5mm Dual White (Center Headlight LED)
- 1 Pair 5mm Dual Red (Tail/Brake)
- 1 Pair High Power Headlights (Interior)
- 2 Pair High Power Rock Lights
- 1 pc Port Conversion Cable (for Center Headlights)
- 1 pc 4-Way LED Splitter (for Rock Lights)
- 1 Set 3D Printed Parts (for Headlights, Interior, Rock Lights)
- Zip Ties and Zip Tie Mounts for clean wiring management
- Attack Scale Bumper Stickers
NOTE
This kit is recommended for use on the Axial Gladiator, however our 3D printed Tail Light inserts aren't meant to be used on the Gladiator. Also, the Dashboard Lights require you to cut the Dashboard, fabricate a clear lens, and transfer of stickers. This is only recommended for advanced modelers.
- Dual Headlights
- Interior Lights
- Rock Lights
- Plug and Play
- HB-2 Controller
Axial SCX24 C10 Light Kit
Axial SCX24 C10 light Kit
MyTrickRC's Axial SCX24 C10 Light Kit is the brightest on the market!
You get the same Attack headlights used in our 1/10 scale kits! Some great features of the Axial SCX24 C10 Light Kit are Attack High Intensity Halogen Headlights that offer a ultra-scale look, and they are bright enough to shine right through the Headlight Stickers that come on the C10.
Additionally, the Axial SCX24 C10 Light Kit comes with our all new CX1- light controller powers 3 High-Power and 4 low Voltage for standard LEDs. The Axial SCX24 C10 Light Kit also includes Orange Front Bumper lights as well as Red Taillights. Keeping things just as accurate on a smaller scale.
Features:
- Scale High Powered Headlights
- CX1 Lighting Controller
- Easy Plug and Play into stock RX
- High Quality Components
- Higher Gauge wires over stock for long life
- Expandability
Includes:
- 1pc CX-1 Light Controller
- 1 pair Attack Halogen Headlight
- 1pc Dual 3mm Red Taillights
- 1pc Dual 3mm Orange Front Running Lights
- 3D Printed Headlights Mounts
- 3D Printed Taillight Buckets
- Attack Scale Bumper Stickers
- Zip Ties and Zip Tie Mounts for clean wiring management
- CX-1 Controller
- Halogen Headlights
- Tail Lights
- Plug & Play
- 3D Buckets
Axial SCX24 Deadbolt Light Kit
Axial Scx24 Deadbolt light Kit
Axial SCX24 Deadbolt Light Kit the brightest on the market.
You get the same Attack headlights used in our 1/10 scale kits. All new CX1- light controller powers 7 accessory lighting ports, 3 High-Power and 4 low Voltage for standard LEDs. the kit also includes Amber Front driving lights as well as Red Taillights. Keeping things just as accurate on a smaller scale.
Features:
- Scale High Powered Headlights
- CX1 Lighting Controller
- Easy Plug and Play in to stock RX
- High Quality Components
- Higher Gauge wires over stock for long life
Includes:
- 1pc CX-1 Light Controller
- 1 pair Attack Headlight
- 2 Single Red 3mm LED
- 2 Single Amber 3mm LED
- Zip Ties and Zip Tie Mounts for clean wiring management
- Attack Scale Bumper Stickers
- 3d Printed Grill
- 3d Printed Rear Tail Light Buckets
- CX-1 Controller
- High Intensity LEDs
- Sleek Look
- Plug and Play
- CX-1 Controller
- Scale Headlights
- Tail Lights
- Plug and Play
- 3D Buckets
Axial SCX24 Ford Bronco
Axial SCX24 Ford Bronco
MyTrickRC's Axial SCX24 Ford Bronco Light Kit is the brightest on the market! You get the same Attack headlights used in our 1/10 scale kits!
Some great features of the Axial SCX24 Ford Bronco Light Kit are Attack Headlights that offer a ultra-scale look.
Additionally, the Axial SCX24 Ford Bronco Light Kit comes with our all new CX1- light controller powers 3 High-Power and 4 low Voltage for standard LEDs. The Axial SCX24 Ford Bronco Light Kit also includes Orange Front Bumper lights as well as Red Taillights. Keeping things just as accurate on a smaller scale.
Features:
- Scale High Powered Headlights
- CX1 Lighting Controller
- Easy Plug and Play into stock RX
- High Quality Components
- Higher Gauge wires over stock for long life
- Expandability
Includes:
- 1pc CX-1 Light Controller
- 1 pair Attack White Headlight
- 1pc Dual Red 3mm LED Taillights
- 1pc Dual Amber 3mm LED Front Running Lights
- Zip Ties and Zip Tie Mounts for clean wiring management
- Attack Scale Bumper Stickers
- 3D Printed Rear Taillight Buckets
- CX-1 Controller
- Attack Headlights
- Tail Lights
- Plug & Play
- 3D Buckets
Axial SCX24 Jeep Gladiator
Axial SCX24 Jeep Gladiator
MyTrickRC's Axial SCX24 Jeep Gladiator Light Kit is the brightest on the market! You get the same Attack headlights used in our 1/10 scale kits!
Some great features of the Axial SCX24 Jeep Gladiator Light Kit are Attack Headlights that offer a ultra-scale look.
Additionally, the Axial SCX24 Jeep Gladiator Light Kit comes with our all new CX1- light controller powers 3 High-Power and 4 low Voltage for standard LEDs. The Axial SCX24 Jeep Gladiator Light Kit also includes Orange Front Bumper lights as well as Red Taillights. Keeping things just as accurate on a smaller scale.
Features:
- Scale High Powered Headlights
- CX1 Lighting Controller
- Easy Plug and Play into stock RX
- High Quality Components
- Higher Gauge wires over stock for long life
- Expandability
Includes:
- 1pc CX-1 Light Controller
- 1 pair Attack White Headlight
- 1pc Dual Red 3mm LED Taillights
- 1pc Dual Amber 3mm LED Front Running Lights
- Zip Ties and Zip Tie Mounts for clean wiring management
- Attack Scale Bumper Stickers
- 3D Printed Rear Taillight Buckets
- CX-1 Controller
- Attack Headlights
- Tail Lights
- Plug & Play
- 3D Buckets
Axial SCX24 Jeep JLU
Axial SCX24 Jeep JLU light Kit
MyTrickRC's Axial SCX24 Jeep JLU Light Kit is the brightest on the market! You get the same Attack headlights used in our 1/10 scale kits!
Some great features of the Axial SCX24 Jeep JLU Light Kit are Attack Headlights that offer a ultra-scale look.
Additionally, the Axial SCX24 Jeep JLU Light Kit comes with our all new CX1- light controller powers 3 High-Power and 4 low Voltage for standard LEDs. The Axial SCX24 Jeep JLU Light Kit also includes Orange Front Bumper lights as well as Red Taillights. Keeping things just as accurate on a smaller scale.
Features:
- Scale High Powered Headlights
- CX1 Lighting Controller
- Easy Plug and Play into stock RX
- High Quality Components
- Higher Gauge wires over stock for long life
- Expandability
Includes:
- 1pc CX-1 Light Controller
- 1 pair Attack White Headlight
- 1pc Dual Red 3mm LED Taillights
- 1pc Dual Amber 3mm LED Front Running Lights
- Zip Ties and Zip Tie Mounts for clean wiring management
- Attack Scale Bumper Stickers
- 3D Printed Rear Taillight Buckets
- CX-1 Controller
- Attack Headlights
- Tail Lights
- Plug & Play
- 3D Buckets
CHP Body Light Kit
CHP Body Light Kit
Want to Build an Ultra-Scale CHP Vehicle, well, the CHP Body Light Kit is the place to start!
This Kit is based around the well proven UF-7R Lighting Controller, and together with our Super Bright LEDs and Ultra-Scale CHP Blink MODE, the Scale Realism will knock your socks off! With functioning Headlights, Tail/Brake Lights, and Remote ON/OFF Control of the Strobes, no other kit on the planet comes close to MyTrickRC's CHP Body Light Kit.
Oh, and this kit is Plug and Play, so Installation is Easier and Faster than Ever! MyTrickRC helps you get Great Results by offering Clear Instructions, Dependable Products, and Helpful Install Videos. Join the Thousands of other Happy MyTrickRC Customers, and see How Awesome your RC Lighting Projects Can Be!
CHP Body Light Kit Includes:
- 1pcs 5mm Dual WHITE Headlight LEDs
- 1pcs 3mm Dual RED Tail-Brake LEDs
- 2pcs 3mm Single RED Strobes
- 2pcs 5mm Single White Strobes
- UF-7R Universal Light Controller
- Power Cables to power off your car’s battery, or 9V battery
- Mounting Hardware
Benefits of this Lighting Package
- Lights Included match actual CHP vehicles
- Realistic Police Lighting for a low cost
- Easy installation that is Plug and Play
- Remotely Control your Strobes ON/OFF function (transmitter with 3rd channel required)
- Top quality products designed in California
- Powers off your car's battery or any DC power source from 5V-15VDC
**Roof Flasher Bar sold separately, not included in this kit.
- 2 Headlights
- 2 Tail/Brake Lights
- 4 Red Strobes
- 2 White Strobes
- Power: 9V or Receiver
CHP Deluxe Light Kit
CHP Deluxe Light Kit
Been wanting to build the Ultimate CHP Car or Truck? Well, MyTrickRC has what you need to make it happen! Introducing to NEWLY Upgraded CHP Deluxe Light Kit. This kit will knock your socks off with how scale it's Blink Patterns are. You will have the most incredibly Scale CHP Vehicle out there.
The CHP Deluxe Light Kit is so Brightly Lit that everyone who see's it cant help but notice it. The best part is that MyTrickRC makes building the CHP Deluxe Light Kit easier than ever. The System is 100% Plug ang Play, and the super Scale Light Bar and Scale Stickers make the Kit Complete. We went out of our way To Help You get Great Results.
CHP Deluxe Light Kit Includes:
Body Light Package
- 1pcs 5mm Dual WHITE Headlights
- 1pcs 3mm Dual RED Tail-Brake Lights
- 2pcs 3mm Single RED Police Strobes
- 2pcs 3mm Single White Window Strobes
- UF-7R Light Controller with SCALE CHP MODE
- Power Cables to power off your Reciever, or 9V battery
- Mounting Hardware
Also Includes CHP Flasher Bar
- Scale Accurate CHP blink pattern
- Red-Blue-Yellow LEDs
- Power Cables to power off the UF-7 controller, or 9V battery
- Mounting Hardware
Also Includes CHP Sticker Set
- Ultra Scale CHP Sticker Set
- 2 Headlights
- 2 Tail/Brake Lights
- 4 Red Strobes
- 2 White Strobes
- Power: 9V or Receiver
CX-1 Controller
CX-1 Controller
The MyTrickRC CX-1 Controller is a mighty power in small package. The clever little controller can power both MyTrickRC High Power LEDs and standard 3mm or 5mm LEDs.
The CX-1 Controller gives you a Simple, Easy, and Safe, way to add LEDs to any RC Vehicles. The CX-1 Controller powers directly off any open port on your receiver, and regulates that power to your LEDs.
So you don't ever need to worry about over powering, or damaging, from mis-wiring. The electronics in the CX-1 are very rugged and meet MyTrickRC's strict Quality Requirements.
The CX-1 Controller Includes:
- 1pc CX-1 Controller
NOTES
- The Power Ratings for the cx-1 Controller are: 5VDC MAX.
- Compact for Tiny Trucks
- Simple, Easy, & Safe
- Lights High Power LEDs
- Lights Standard LEDs
- Low Cost 5VDC System
Deluxe Boat Light Kit
Deluxe Boat Light Kit
The Deluxe Boat Light Kit is a Premium Scale RC Light Kit for your RC Power or Sail Boat. Impress your friends with the incredible Scale Appearance and Brightness of these lights.
This 100% Waterproof Light Kit includes Super Bright LEDs and MyTrickRC's SQ-1 Lighting Controller which is nice and compact so it's easier to install, and adds Minimum Weight to your Boat. The 3D Printed Navigation Light Housing and Stern Light Pole have a great Realistic Appearance, and are extremely Visible at Night. They are made from Rugged Nylon plastic, and designed to be Plug and Play. The Deluxe Boat Light Kit also has Remote On/Off Controlled on a 3rd Channel, so it's possible to switch your lights On and Off from your Transmitter. All required Mounting Hardware and instructions come included.
Deluxe Boat Light Kit Includes:
- 1pc SQ-1 Controller (powers from your boat's receiver, or optional 9V battery*)
- 1pc 3mm Super Bright WHITE Stern LED
- 1pc 3mm Super Bright RED Nav LED
- 1pc 3mm Super Bright GREEN Nav LED
- 1set 3D Printed Nav Light and Stern Pole
- Mounting Hardware
*9V Battery Adapter Cable Sold Separately
- SQ-1 Controller
- Deluxe Boat Kit
- Scale Nav Lights
- Remote On/Off
- Waterproof
DG-1 Dragon Controller
DG-1 Dragon Controller
The DG-1 Dragon Controller is a Revolutionary and Innovative RC Lighting Controller that gives you the ability to add tons of High Power Lights to your RC Rig. Designed specifically for Off Road applications, the Dragon can power any MyTrickRC Attack Light Bar, Rock Light, Headlights, Halo and other MyTrickRC Wafer LEDs. It also give you the ability to have Running Lights and Tail/Brake (or Reverse) so you can have a nicely lit Scale Truck. In fact, of all our Off Road Kits use the Dragon as their Controller.
The clever design of the Dragon taps power directly off your Battery, so you can add as many Insanely Bright Attack LEDs as you want and never have to worry about overloading your receiver! It also has a battery protect feature that will automatically power down the LEDs when your Lipo battery gets low so that you don't over-discharge it.
Also the Remote ON/Off & Brightness control on the Dragon can be done Manually using it's tethered MODE Button, or Remotely off a spare channel on your Receiver. And, the Dragon is waterproof, so no need to worry about running in we conditions, The Dragon also includes a Quick-Disconnect Power Cable so you can easily disconnect your body from your Truck. Join the family of customer who love the DG-1 Dragon Controller. With literally thousands of DG-1 Dragon's in the field, it's well proven design continues to light the trail of many happy MyTrickRC Customers.
DG-1 Dragon Controller includes:
1pc DG-1 Dragon Controller
Mounting Hardware
Maximum input Voltage 11.4
- Waterproof
- On/Off Control
- Adjustable Brightness
- Brake or Reverse
- Rugged Proven Design
Drift-X Controller
Drift-X Controller
Inspired and Proven by the Los Angeles RC Drift Scene, MyTrickRC's Drift-X Controller builds on our successful UF-7 Controller line by adding sweet features designed specifically for Drift Cars!
With 9 Blink Patterns for Scale Drift Cars to Scale Street Cars, including wild RC Drift Patterns like Crossfire, Alien, and Wig Wag, the Drift-X Controller offers tons of Lighting Configuration Options!
The Drift-X Controller features our finely tuned Throttle Response Backfire which flashes a super-realistic Scale Backfire when you let off the Throttle. And most Blink Modes have Automatic Hazard Lights where all appropriate LEDs start to blink in a Hazard Light fashion 30 seconds after your car stops - also great for Scale Emergency Vehicles which just arrived as First Responders!
For Scale Street Cars, the Drift-X Controller offers Two Versions of Turn Signal: normally OFF/blink ON when turning OR normally DIM/blink BRIGHT when turning.
You can even use a 3rd Channel to Control your Drift Patterns!
And since the Drift-X Controller shares the same Rock Solid Electronics as the latest and greatest generation of our tried and true UF-7 Controller product line, it has the same Plug & Play Design, and Simple Operation which has made MyTrickRC the obvious choice for RC Enthusiasts across the RC Hobby. The Original UF-7 Electronics were already Tough and Reliable by design since we don't cut corners on materials or components. For this new generation, we've made improvements such as making the Controller Waterproof, upgrading all connectors to be Gold Plated to further enhance long term contact performance, and increasing the Pigtail output to support up to 2 Amps of current!
The Drift-X Controller includes:
- 1pc Drift-X Controller
- 1pc Servo Y-Cable
- 1pc 9V Battery Adapter
- Mounting Hardware
NOTES
- The Power Ratings for the Drift-X Controller are: 4.5-12VDC, 2 Amps MAX.
- Drift-X Controller's Pigtail Output passes Receiver Power straight through it. Therefore the voltage on the Pigtail Output will be the same as your Receiver. CAUTION - Do Not draw more power off your receiver than it's rated for.
- Drift-X Controller's Port E (Headlights Port) can be used to power Headlights and/or Running Lights. Port E stays ON STEADY in all Land Vehicle MODEs.
- Each port on the Drift-X Controller can power LOTs of LEDs, but the more LEDs you add to one port, the dimmer all of them will become. We recommend trying not to exceed 4 LEDs per Drift-X Controller LED Output.
- A Higher Input Voltage on the Drift-X will make all of your LEDs slightly Brighter, However it's better for the Controller if you don't exceed 9VDC.
- MyTrickRC sells LED Splitter Cables which allow you to add more LEDs to a port. However, you can't mix all LED colors together on one LED Splitter. Please see our NOTEs about this on the individual LED Splitter Product Pages. You can find LED Splitters here: https://mytrickrc.myshopify.com/collections/cables
* The NEW Blink features we mentioned are only in certain MODEs
** The Drift-X Controller Can Power:
- 1pc Attack 5" or 6" Light Bar, or Light Bar from Other Manufacturer
OR 1 pair of
- Attack 17mm Round Wafer Headlights
- Attack 19mm Rectangular Wafer Headlights
- Attack Halo Headlights
- NEW Attack 7-LED Wafer Strip Light
OR
- 4 pairs of Attack Spot Lights, original Attack Headlights, Attack Rock Lights, or Attack 9mm Wafer Lights
- Specialized for RC Drift
- Scale Backfire
- Automatic Hazard Lights
- Exotic Blink Patterns
- Two Turn Signal Styles
Element Enduro Light Kit
The Element Enduro Light Kit
Out of Stock
Need a Light Kit for your Element Enduro, then you need look no further than the MyTrickRC Element Enduro Light Kit. The Element Enduro Light Kit is a Deluxe light kit based on the the DG-1 Controller, and is very easy to add Light Bars, Rock Lights, Halos, Wafers, or other LEDs to it. The Element Enduro Light Kit also includes 3D Printed Tail Light Buckets that fit the stock body. And, the Light Buckets include paint mask stickers if you want to paint a clear body. The Element Enduro Light Kit system is Plug and Play and easy to install into the existing Light Buckets.
Features:
- Easy Installation
- Waterproof LEDs
- In-Line Quick Disconnects between Body and Chassis
Includes:
- DG-1 Controller
- 1 Pairs of Attack High Power Headlights
- 1 Quad Front Running and Rear Tail Lights
- 1Pair Reverse Lights
- 3D Printed Tail Light Buckets
- Zip Ties and Zip Tie Mounts for clean wiring management
- Attack Scale Bumper Stickers
- 3D Printed Headlight
- Rock Lights Included
- Tail/Brake Lights
- DG-1 Lighting Controller
Element Gatekeeper Light Kit
Element Gatekeeper Light Kit
Element Gatekeeper Light Kit is the perfect compliment to your Gatekeeper. You'll light up the trail like no other!
The MyTrickRC Element Gatekeeper Light Kit is nice and compact, and offers some great features including a High Powered 2 Inch Light Bar upfront combined with four Attack Rock Lights, and some wicked Tail Light Pods. No Lighting controller needed on this one, its all powered off our Attack Light Power Regulator, drawing power directly from the receiver! It's Plug and Play and the Lights will be ON whenever the truck is On.
If you ever want to upgrade this kit to power off a Dragon Controller instead of the Light Bar Regulator, you can easily do that. All in this kit LEDs are compatible with our Dragon Controller.
Features:
- Hi Performance / Low Cost
- Easy Installation
- Minimal Wiring
- Plug and Play
- Tons of Light
Includes:
- 1- 2" Attack Light Bar
- 2- Pair High Power Spot Lights
- 1- Pair Red 9mm Wafer LEDs
- 1- MyTrickRC Light Bar Regulator
- 1- 4-Way LED Splitter
- 3D Printed S4 Pods
- Zip Ties and Zip Tie Mounts for clean wiring management
- Attack Scale Bumper Stickers
Installation notes
- All LEDs Zip Tie Into Place
- Hinge Function Not Affected By Wires
- No Modifications Needed
- Easy Installation
- Ultra Compact Design
- High Intensity LEDs
- Taillight Pods
- Includes Rock Lights
- Plug and Play
Element RC Bushido Light Kit
The Element RC Bushido Light Kit
Looking for the ultimate lighting setup for your Element RC Bushido? Look no further, the MyTrickRC Element RC Bushido Light Kit is perfect!
The Element RC Bushido Light Kit features the CX-1 Controller at its heart. A Compact LED Light Controller that powers off of a free port in your receiver or one the 5.0V ports Element RC provides on their Reedy ESC. The Element RC Bushido Light Kit also includes 3D Printed Tail Light Buckets that fit the stock body. The Element RC Bushido Light Kit is Plug and Play and easy to install.
Features:
- Easy Installation
- Waterproof LEDs
- 3-D Printed Tail Light Buckets
Kit Includes:
- CX-1 Controller
- 1 Dual Halogen 5mm LEDs
- 1 Dual Red 3mm LEDs
- 2 Pair Attack Spot Light LEDs
- 3D Printed Tail Light Buckets
- Zip Ties and Zip Tie Mounts for clean wiring management
- MyTrickRC Decal
- CX-1 Controller
- Rock Lights
- Period correct Halogen Headlights
- Tail Lights
Element RC Ecto Light Kit HB-2
Element RC Ecto Light Kit
The perfect complement to your Element RC Ecto, is the ability to go anywhere at anytime; day or night!
The Element RC Ecto Light Kit is a Hight Power Light Kit based on the HB-2 LED Light Controller. The Element RC Ecto Light Kit pumps out TONs of Light, so all of your friends who don't have this kit will be envious of the Scale Look and amazing performance!
The Element RC Ecto Light Kit is plug & play, making installation simple and hassle free!
The Ecto Light kit also come with cleans lenses and a couple FREE Ecto 3D Grill/Light Bucket files to print and add the extra POP, to your build.
Features:
-
Simple, hassle-free operation
- Easy Installation
- In-Line Quick Disconnects between Body and Chassis
Kit Includes:
- 1-HB-2 LED Light Controller
- 1-Dual Red 5mm
- 1-27mm Strip LED
- 1-Clean lenses
- 3D Print files (Online)
3D Grill Installation
Start be cutting away the grill section of your Element RC Ecto body.
Note: Cut right on the edge of where the body dips down into the grill area. Be careful not to cutaway too much!
Next you will take your 3D printed grill and insert the 27mm strip LEDs from the rear.
NOTE: Take your time and insert the LED's with care.
Once installed from the rear of the grill, you can cover the LED strips with the included clean lenses.
NOTE: Insert lenses with care being sure to note any flash or fitment issues with the 3D print. The lenses should fit snug, NOT TIGHT.
You can now slide your assembled grill/light setup into the Ecto body. We recommend a silicone-based adhesive such as ZapGoo, e6000, ShoeGoo or equivalent.
Rear LED Installation:
To install the tail lights on your Ecto, you will need to first make some holes in the body where you would like to locate your LEDs.
Note: Be sure not to make your holes too big, the LED holder will not work correctly.
After you make your holes, insert the included LED holders into the body from the outside.
Once the holders are installed, you install the LED's from the inside of the body.
Once installed, we again recommend a small amount of silicone-based adhesive on the back of the LED's to help hold them securely in place.
3D Print Your Own Grill!
- The Element RC Ecto Light Kit was designed to work with some of the downloadable 3d grill files below.
- Be sure to print your grill in a material that can handle the heat the LEDs will generate. We recommend ABS or Carbon Nylon. PLA/PLA+ prints will likely not handle the heat and will deform.
Click the grill image to download the files
NOTE - Dimension of 3D Prints varies with different printers. If clear lenses are too tight to fit properly, try scaling up or modifying the STL file.
- HB-2 Controller
- Grill Included
- Super Bright
- Tail Lights
- Expandable